PDA

View Full Version : Power windows dont work!


KEEP
09-21-2011, 12:44 PM
I tried to search but I didn't found anything to help me. My power windows dont work anymore. I checked all the fuse in the engine bay fuse box and they all work. Inside the car, half of the fuse don't work (all the fuse on the left side). When I turn the key on, my cluster lights up, radio, fuel pump but I can't lock the doors or lift the windows. Anyone had the same problem? I accidentally connected the battery on the wrong side. It happened right after.

Thanks to anyone who can help me, my windows are currently down and I don't want to duct tape them again!

carter,wade
09-21-2011, 12:48 PM
what was going on before this all happened,if you have a test light that would help to see were you are getting power and were your not.As far as the battery backwards that's a big no no and that could be your problem.I would start looking for melted wires.

KEEP
09-21-2011, 12:54 PM
what was going on before this all happened,if you have a test light that would help to see were you are getting power and were your not.

I went to the garage so a guy would do my wirring but he couldnt because the harness wasn't good. He putted back my battery/alt etc harness. He lowered the windows while he was working on the car. I realized it when I got home but I can't find a way to make them work again. I have a test light and I checked all my fuses. Every fuse in my engine bay box works but its another story for the box inside the car. The left side of the fuses dont work, but they all work on the right side.

carter,wade
09-21-2011, 02:18 PM
start checking power to the switch for the window,I would still not rule out the battery backwards jacking stuff up.Wish i was close I love to help!

carter,wade
09-21-2011, 02:20 PM
cram in there and check that fuse box a little more pull fuse's.Check to see if the fuse spot is burnt or melted.

KEEP
09-21-2011, 05:01 PM
cram in there and check that fuse box a little more pull fuse's.Check to see if the fuse spot is burnt or melted.

I found the problem, thanks man.