venom2034
09-21-2011, 09:04 AM
Hey guys I decided to go SR and I want to get rid of some things I will no longer be using. The biggest thing I'm pushing to sell is the motor. I want to give a chance to a local buyer, in the NJ or NYC area to see the motor running before I pull it out. I want this to be as legit as possible, I'm not trying to set anyone up for trouble.
So pretty simple, if someone is interested pm me or text me, stop by, take a look at it, agree to buy and then well set up a date to take it. The reason why I can't let it go on the spot is because I still have to daily the car 'till I start the swap. I plan to pull out the motor in two weeks. With that being said, here is a picture of what its coming out of with a little more info.
http://www.hiwtc.com/photo/products/38/03/43/34300.jpg
Ok well that's what I used to drive but here's the real thing.
http://farm7.static.flickr.com/6158/6169423296_2bb594bba1.jpg
It's a 95 ka24de, but I swapped it into my s13. It already has the s13 ka intake manifold and the exhaust manifold . I was told that this motor has approximatly 115xxx miles. It pulls very strong, defintly a huge improvement from motor that I swapped it for. Everything is stock internally, and before I swapped in the motor I resealed the valve cover. The previous owner replaced the front main seal, changed the water pump, oil pick up, oil pan, all the neccessary stuff for a good maintenance. So the way that I will be selling it is a direct plug and play for a S13 application. For an s14 application the reverse has to be done. Transmissionand ecu is included. Probably other things that go along with it but I dont remember what else to list. I would like to see $500 out of this but of course I will consider ALL offers.
I have a set of four replica wheels that are no use to me. The closest comparison i found was the work vs wheels without the crazy lip. these wheels are 7in wide and have an offset of about +38. They look much better then oem rims and with a nice paintjob could go a long way. I run 205/50/17 tires on them. I would like to let it go for $300 but of course I will consider ALL offers.
http://farm7.static.flickr.com/6162/6170678839_2a22096ffe_z.jpg
a pair of silvia dual projector headlights, one of the headlights have the inner tabs missing. I cleaned the headlights so everything looks minty fresh. $200 and will consider your offer.
http://farm7.static.flickr.com/6152/6169709356_cf8fe28aec.jpg
A pair of front 4 lug hubs and rotors. the rotors have about 3,000 miles on them. bearings on the hubs are still good. $40
A pair of rear 300zx 5 lug hubs, they bolt right on. The bearing are in not so good condition. $50
I have some more things but will update later on with pictures too. text me if you'd like, (718) 791- 6418
TRADES ARE WELCOME
looking for 300zx front aluminum calipers and race rotors, arm packages (toe,traction, tension, rucas) intercooler kits, sway rear, rear strut bar, boost gauges. Idk what else but let me know what you have.
So pretty simple, if someone is interested pm me or text me, stop by, take a look at it, agree to buy and then well set up a date to take it. The reason why I can't let it go on the spot is because I still have to daily the car 'till I start the swap. I plan to pull out the motor in two weeks. With that being said, here is a picture of what its coming out of with a little more info.
http://www.hiwtc.com/photo/products/38/03/43/34300.jpg
Ok well that's what I used to drive but here's the real thing.
http://farm7.static.flickr.com/6158/6169423296_2bb594bba1.jpg
It's a 95 ka24de, but I swapped it into my s13. It already has the s13 ka intake manifold and the exhaust manifold . I was told that this motor has approximatly 115xxx miles. It pulls very strong, defintly a huge improvement from motor that I swapped it for. Everything is stock internally, and before I swapped in the motor I resealed the valve cover. The previous owner replaced the front main seal, changed the water pump, oil pick up, oil pan, all the neccessary stuff for a good maintenance. So the way that I will be selling it is a direct plug and play for a S13 application. For an s14 application the reverse has to be done. Transmissionand ecu is included. Probably other things that go along with it but I dont remember what else to list. I would like to see $500 out of this but of course I will consider ALL offers.
I have a set of four replica wheels that are no use to me. The closest comparison i found was the work vs wheels without the crazy lip. these wheels are 7in wide and have an offset of about +38. They look much better then oem rims and with a nice paintjob could go a long way. I run 205/50/17 tires on them. I would like to let it go for $300 but of course I will consider ALL offers.
http://farm7.static.flickr.com/6162/6170678839_2a22096ffe_z.jpg
a pair of silvia dual projector headlights, one of the headlights have the inner tabs missing. I cleaned the headlights so everything looks minty fresh. $200 and will consider your offer.
http://farm7.static.flickr.com/6152/6169709356_cf8fe28aec.jpg
A pair of front 4 lug hubs and rotors. the rotors have about 3,000 miles on them. bearings on the hubs are still good. $40
A pair of rear 300zx 5 lug hubs, they bolt right on. The bearing are in not so good condition. $50
I have some more things but will update later on with pictures too. text me if you'd like, (718) 791- 6418
TRADES ARE WELCOME
looking for 300zx front aluminum calipers and race rotors, arm packages (toe,traction, tension, rucas) intercooler kits, sway rear, rear strut bar, boost gauges. Idk what else but let me know what you have.