PDA

View Full Version : skyline r33 rack and pinnion fit an s14 ?


Jake1992
09-10-2011, 10:41 AM
mine started leaking and looking for a new one i came accross a skyline...
help!

thanks ..

fliprayzin240sx
09-10-2011, 06:42 PM
It'll mount up but not sure the tie rods are too long or if the steering shaft will line up.

Jake1992
09-11-2011, 03:54 PM
It'll mount up but not sure the tie rods are too long or if the steering shaft will line up.

thanks... anyone else?:hyper:

Sileighty_85
09-11-2011, 04:14 PM
it might, Like flip says it will mount up, might be able to swap over the S14 tie rods. Steering U Joint might as well..... Not 100% sure

Jake1992
09-12-2011, 07:21 AM
it might, Like flip says it will mount up, might be able to swap over the S14 tie rods. Steering U Joint might as well..... Not 100% sure

thanks.... ill guess ill have to check it out

Jake1992
01-23-2012, 09:23 AM
for who ever is wondering ...

It mounts up without a problem.
Then comes the problem with the oil feed
to the pump... it has a banjo fitting , and
the s14 has a hardline going in and a screw bolt thingy
that screws it in place, that wont fit in the skyline
rack, so i got a banjo welded on my hardline.
the return is a niple so simple with some clamps and hoses.
now. Did not test yet ... but does anyone know about the solenoid
on the rack of a skyline and how to hardwire it ?