View Full Version : Wierd noise need help
andre0525
09-05-2011, 01:18 PM
I can only hear the noise on idle and im thinking it has something to do with timing chain or tensioner. Has anyone heard anything like this?
PjgWXMqgs38
andre0525
09-05-2011, 06:11 PM
found a similar noise problem but this guy has cams, same noise thou
my video has bad sound quality
35KxXYHUBDc
Banegraphix
09-05-2011, 06:18 PM
take your valve cover off and take a look at the upper timing chain guide its right between the cam gears above the chain, it could be all chewed up from who ever was beating the motor before you had the same issue on my old SR
andre0525
09-05-2011, 08:16 PM
nah thats not it i took it off it looks fine
its coming from the cam gears or cas somewhere around there
andre0525
09-07-2011, 11:27 PM
i looked into where the chain sits and theres 2 guides in there one on the tesioner side and the other on the driver side,the one on the driver side seems a bit loose im just wondering if that could be making the noise i looks plastic but i wouldnt know i read somewhere that that guide can be removed on a ka i need opinions :)
and that guide is right under the cas, i took the cas out and it looks fine with normal wear
davirene
09-07-2011, 11:39 PM
Change your timing chain guides......I pulled mine off of an kade altima......noise went away and engine ran smooth..... :)
tac 1
09-24-2011, 10:47 PM
Op, have you fixed the problem yet? My sr is making same annoying sound. Swap out my cas, removed upper guide and took out my ps belt. It must be them chain guides.
Sr - YouTube (http://www.youtube.com/watch?v=Ya3EmSW_EVA&feature=youtube_gdata_player)
andre0525
09-25-2011, 01:19 PM
if its not the cas then its the guide on the right for sure im planning to change the guides and tensioner on my sr in the future
andre0525
09-25-2011, 01:20 PM
and if your upper guide looks fine id put it back on
tac 1
09-25-2011, 07:58 PM
if its not the cas then its the guide on the right for sure im planning to change the guides and tensioner on my sr in the future
Lmk how it goes! Do u happen to also have a clicking sound (coming from chain area also) when ever u redline it? Mine does it for couple times whenever i shift past 6k rpm or so then goes away.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.