SOOO confused about cams

[mawticulous]

so i been researching for about 2 hours tryin to figure out what cam colors and stamps i need for the s13 cam into s14. both my cams are stamped 53f and i have green on the intake and orange on the exhaust. just bought the motor not to long ago and was told it was a s14 motor but from what ive been reading it seems like both the intake/exhaust cams from an s13 were swapped in. im super confused about what i have and what i need. can anyone help me to figure out what cams i have. will take a pic if needed.

edit: and they both have a #2 stamped on them also.

[Jay420sx]

S14 intake (232) - orange stripe, first lobe is aligned with the alignment pin
S14 exhaust (232) - green stripe, first lobe is about 4 teeth clockwise from the pin
S13 intake (240) - green stripe, first lobe is aligned with the pin
S13 exhaust (248) - orange stripe, first lobe is 4 teeth clockwise from the pin

[mawticulous]

S14 intake (232) - orange stripe, first lobe is aligned with the alignment pin
S14 exhaust (232) - green stripe, first lobe is about 4 teeth clockwise from the pin
S13 intake (240) - green stripe, first lobe is aligned with the pin
S13 exhaust (248) - orange stripe, first lobe is 4 teeth clockwise from the pin

ahh that was way easier to understand, so im guessing that both i/e from a s13 was swapped in.