hey you wiring specialists! help please

[HellaSexyS13]

so im almost done wiring in my s14 sr20 into my s13 coupe with a few connectors i dont know what they are for or if i need them. i got the harnesses from wiring specialties so everything is correct, i contacted them too for help and still waiting to here back so im posting on here too.

in picture one it shows the trans harness and a plug on the trans that i circled but none of those connectors i have fits in it. i know not all the plugs on the trans harness are used but i cant find one to go into the one plug on the trans itself. here is the pic:
http://i154.photobucket.com/albums/s240/ccaughy/0828111301a.jpg

picture 3 shows three connectors in the front passenger side coming the from the fuse box are and i dont know what they were for or if i need them for the swap or not:
http://i154.photobucket.com/albums/s240/ccaughy/0828111303.jpg

picture 4 are 2 connectors on the drivers side, one looks like a vacuum hose goes on it which im guessing is for the one on the trans and i dont know about the other:
http://i154.photobucket.com/albums/s240/ccaughy/0828111305.jpg

and the last pic is this wiring and plug comin from the power steering line, what does or did this plug into and do i still need it:
http://i154.photobucket.com/albums/s240/ccaughy/0828111305a.jpg

thanks for any help

[HellaSexyS13]

ok so picture 4 i figured out the one is secondary air i think which i took out and the other is the vacuum line from the tranny, but what are these other guys ? someone help me

[qoOp]

pic 4, the single wire connector looks like the one that goes to the AC compressor maybe?

[HellaSexyS13]

well i dont have ac either so...i think i just have extra plugs that arent needed

[KiLLeR2001]

Picture 5 is for your power steering idle control. Basically when you go full lock, it'll keep your idle from dipping down. Not needed, but nice to have.