PDA

View Full Version : Pleeeease Help~!!!


wntrcoatblu240
11-22-2003, 07:46 PM
PLEASE, i really don't know what to do, ever since my starter crapped out on me one day, i replaced it.... but after that the car never drove the same... like the starts are tough and sluggish... i brought the car to a local mechanic and he said that the teeth on the flywheel is broken.. .and htere is nothing to worry about.. is this true? the car drives fine after i start.. it' sjust the initial starts that the car struggles with... if i was to fix it myself does it require skills beyond of a beginner? thanks for reading..

mbmbmb23
11-23-2003, 01:32 PM
You'd have you drop your tranny and swap in a different (used in good condition) flywheel. If you have any friends with a nice garage and tool collection, maybe give it a shot. Of course, if you replace the flywheel, you might as well replace the clutch while you are in there. Just a thought.



-m

RedlineRacer
11-23-2003, 02:12 PM
Does it act like you have no torque when you are trying to start from a stop? Like it is acting like you aren't giving it enough gas and it starts to shutter? If this does, then you might wanna check you injectors. I have this problem. I changed everything trying to find it (spark plugs, spark plug wires, distributer cap and rotor, fuel filter, air filter, and cleaned all the intake pieces). I didn't find this problem until I took my car to a mechanic and he scanned it and the injectors came back as clogged.

wntrcoatblu240
11-25-2003, 01:46 AM
no it isn't like if i don't have any torque or anyting like that.. it's just the initial start up that has problems... once it starts it all good...

misnomer
11-25-2003, 11:03 AM
Starting the engine is sluggish? Not driving the car?

That would make sense if your flywheel is missing teeth. Deal with it or replace the flywheel.