PDA

View Full Version : Need halp!!


wjrd
08-25-2011, 06:10 PM
sorry guys for the newbness. but i just bough an s13 a little over a month ago in pretty used condition. so i decided to take everything off the car and rebold/mount everything and anything i can. and first thing i decided to do was the sparco sprint seat that it came with. when i unbolted it i found out he jerry-rigged it and put a made-shift bracket to hold the seat in (totally unsafe).

so my question is: is this bracket/base- Sparco 400-Series Driver Seat Base Nissan 240SX S13 89-94 - 400SB026L (http://www.customcarscentral.com/spr400sb026l-nissan-240sx-s13-89-94-.html) compatible with the car and the seat? (i have a sparco slider too btw) i did a bit of research but couldnt find much. i also read that the bride brackets are compatible with sparco seats too? i just want to make sure i buy the RIGHT brackets that fit the car (91 s13)

thanks in advance!

ALSO: if you have a pair used or new and are trying to get rid of them ill be more than happy to purchase them from you (im looking for both passenger and driver side)

wjrd
08-26-2011, 01:44 PM
bump!!! <3

illvialuver
08-26-2011, 02:09 PM
if you run the bride bracket you have to modify( welding required ) to make it work. Your best bet is the nagisa or nams rails, they are side mount rails which will let you sit lower and not as high as a bottom mount rail like the sparco ones.

wjrd
08-26-2011, 02:32 PM
i see. will the ones i posted work too?