sr water lines and lines help please

[Volcom887]

http://i1220.photobucket.com/albums/dd454/Volcom887/2011-08-09221102-1.jpg

#1 obviously oil line goes to the top of the turbo

#2 coolent return goes to #4?

#3 coolant to the water inlet #5?

#4 coolant out goes to #2?

is this correct and where can i get the lines for this turbo they are stock oil and water lines...... but i want steel braided lines

and is it ok to run the coolant to the neck of the coolant return back to radiator?

[UNITEDMASTER]

If you want steel braided lines for the above setup. You need to change the banjo(s) at the turbo to banjo/AN. Then get the metric to AN adaptors for the block side.Now make lines to fitRoute them however you need. DONE

[Volcom887]

If you want steel braided lines for the above setup. You need to change the banjo(s) at the turbo to banjo/AN. Then get the metric to AN adaptors for the block side.Now make lines to fitRoute them however you need. DONE



the adapters are almost impossible to find.....

the banjo steel braided lines on ebay

will those work like

Turbo Oil Water Line SR20DET S14 S15 Ball Bearing GT28 | eBay (http://cgi.ebay.com/ebaymotors/Turbo-Oil-Water-Line-SR20DET-S14-S15-Ball-Bearing-GT28-_W0QQcmdZViewItemQQhashZitem2a12a080a4QQitemZ18070 1135012QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)

they are like bolt ons?

[japslapsilvia]

the adapters are almost impossible to find.....



no they are not, they can be found at most all the big suppliers..summitracing, jeggs, pegasus, anplumbing...etc..

[s14unimog]

I've got mine like #2 to #5 and #3 to #4. I don't think the coolant passage has a directional flow. What's up with the "RB" tag?

[Volcom887]

I've got mine like #2 to #5 and #3 to #4. I don't think the coolant passage has a directional flow. What's up with the "RB" tag?

i accidently hit rb :o oops lol

hmmm i need to figure the lines out idk what way eerythinggoes like return ect...

[s14unimog]

I just told you.... I've had mine like that for years without issue.

[Volcom887]

I just told you.... I've had mine like that for years without issue.

Ok thanks ...I'm gona setup that way