omgRWDgoodness!
07-20-2011, 11:01 PM
I'm starting this thread because this wasn't getting any attention in the RB FAQ thread, despite me posting diagrams/pictures out the ass and clearly stating my problems and questions. I really need to get some answers so I can finally start working on getting my RB25 into my S14 instead of having it just sit on the pallet in my garage, and thought the idea of consolidating a lot of the RB wiring info would be more helpful than searching for a bunch of scattered bits & pieces of information from every corner of the Web.
WITH THAT SAID I hope that this thread not only helps myself, but others with their RB swap. While I would like to keep it focused on the wiring aspect of the swap, other minor technical dilemmas to be addressed are also welcomed. Feel free to post questions, contribute any information deemed valid and appropriate, & offer any assistance that you may be capable of providing to the community.
(See Sileighty_85's http://zilvia.net/f/chat/332057-project-rb-how.html thread for an extensive guide on the actual swap in its entirety.)
Let's begin with some of my issues and observations I made between my own motorset's harness and those of others I've come across through my searches.
RB25 Series 1 harness
2 blue Relays near ECU & F3 plug
Wider MAFS connector for green label 'J60' 5-prong MAFS
RB25 Series 2 harness
1 blue Relay near ECU & F3 plug
Narrower MAFS connector for pink label 'E60' 3-prong MAFS
Useful note: Fourth-gen ('95-'99) Maxima MAFS are exactly the same as S2 RB25 MAFS so they are interchangeable. The part #s are the same, as well as me being able to confirm this after finding out I was sent the wrong MAF with my motorset and hitting the local U-Pull-A-Part.
I am also led to believe that because of the ignitor chip/coilpack difference between Series 1 and 2 RBs, there is a discrepancy in the wiring. In the following diagram, it instructs to somehow re-pin two wires into one terminal. The first is what should be a solid RED wire (for "ignition relay power") from terminal #4 to #17, the second being a WHITE with BLACK STRIPE wire (ECCS Relay power) from terminal #24 to #17 as well. This is where I feel the wiring difference between S1s and S2s comes into play. Since S1s have 2 Relays and S2s only one, it looks like S1 owners have to find some way to make two wires merge into one terminal.
Disclaimer: I am NOT 100% on this, probably not even 75%. I have come to this conclusion through what I have researched so far, along with the complete lack of any solid red wire on my S2 motorset's harness originating from the ECU or M63 (F3) plug.
http://i442.photobucket.com/albums/qq144/S13RB20240SX/RB25intoS142.jpg
http://i54.tinypic.com/2wqr3ut.jpg
This is a quick ignition system circuit as taken from the R33 FSM that seems to make some sense from what I have gathered.
http://i55.tinypic.com/dndhee.jpg
Finally, I have a question that pertains to a non wiring-related technical matter. Has anyone tried or would happen to know if the HKS adjustable wastegate actuator kit for either S13 or S14/15 SR20 will work with an RB25 T28, or do I need to special order the RB25 kit? I've been trying to compare the two and the only difference I see is the bracket and how it spaces out the actuator from the turbo due to the stock RB turbo's hotpipe inlet being in the way. Any advice on this would be great.
ECR33/ER34 kit:
http://i3.ebayimg.com/04/i/001/22/53/7b3b_12.JPG
SR20DET kit:
http://i3.ebayimg.com/05/i/000/ba/c0/3c4e_1.JPG
That'll be it for now. Hopefully this will answer some questions and give people a place to turn to for these kinds of discussions. Thread will of course be updated and corrected if/as interest arises, information is shared and questions are answered.
WITH THAT SAID I hope that this thread not only helps myself, but others with their RB swap. While I would like to keep it focused on the wiring aspect of the swap, other minor technical dilemmas to be addressed are also welcomed. Feel free to post questions, contribute any information deemed valid and appropriate, & offer any assistance that you may be capable of providing to the community.
(See Sileighty_85's http://zilvia.net/f/chat/332057-project-rb-how.html thread for an extensive guide on the actual swap in its entirety.)
Let's begin with some of my issues and observations I made between my own motorset's harness and those of others I've come across through my searches.
RB25 Series 1 harness
2 blue Relays near ECU & F3 plug
Wider MAFS connector for green label 'J60' 5-prong MAFS
RB25 Series 2 harness
1 blue Relay near ECU & F3 plug
Narrower MAFS connector for pink label 'E60' 3-prong MAFS
Useful note: Fourth-gen ('95-'99) Maxima MAFS are exactly the same as S2 RB25 MAFS so they are interchangeable. The part #s are the same, as well as me being able to confirm this after finding out I was sent the wrong MAF with my motorset and hitting the local U-Pull-A-Part.
I am also led to believe that because of the ignitor chip/coilpack difference between Series 1 and 2 RBs, there is a discrepancy in the wiring. In the following diagram, it instructs to somehow re-pin two wires into one terminal. The first is what should be a solid RED wire (for "ignition relay power") from terminal #4 to #17, the second being a WHITE with BLACK STRIPE wire (ECCS Relay power) from terminal #24 to #17 as well. This is where I feel the wiring difference between S1s and S2s comes into play. Since S1s have 2 Relays and S2s only one, it looks like S1 owners have to find some way to make two wires merge into one terminal.
Disclaimer: I am NOT 100% on this, probably not even 75%. I have come to this conclusion through what I have researched so far, along with the complete lack of any solid red wire on my S2 motorset's harness originating from the ECU or M63 (F3) plug.
http://i442.photobucket.com/albums/qq144/S13RB20240SX/RB25intoS142.jpg
http://i54.tinypic.com/2wqr3ut.jpg
This is a quick ignition system circuit as taken from the R33 FSM that seems to make some sense from what I have gathered.
http://i55.tinypic.com/dndhee.jpg
Finally, I have a question that pertains to a non wiring-related technical matter. Has anyone tried or would happen to know if the HKS adjustable wastegate actuator kit for either S13 or S14/15 SR20 will work with an RB25 T28, or do I need to special order the RB25 kit? I've been trying to compare the two and the only difference I see is the bracket and how it spaces out the actuator from the turbo due to the stock RB turbo's hotpipe inlet being in the way. Any advice on this would be great.
ECR33/ER34 kit:
http://i3.ebayimg.com/04/i/001/22/53/7b3b_12.JPG
SR20DET kit:
http://i3.ebayimg.com/05/i/000/ba/c0/3c4e_1.JPG
That'll be it for now. Hopefully this will answer some questions and give people a place to turn to for these kinds of discussions. Thread will of course be updated and corrected if/as interest arises, information is shared and questions are answered.