PDA

View Full Version : AL KA-T, RB, clutches, turbo stuff, ect..


s13mike91
07-05-2011, 02:56 PM
Tial Small Red - 5.80 psi, .40 bar spring-$20shipped

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-20-00_620.jpg



DOHC S13 ka24de ignition coil pack-$15 shipped

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-20-20_913.jpg

SOHC ignition coil pack $15shipped
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-23-35_279.jpg

stock S13 fuel pump $20shipped
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-23-57_374.jpg

SOHC KA24E MAF with pigtail $30shipped
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-24-22_954.jpg

Emance Consult Cable with the serial to usb adapter and adapter driver cd, i have never used this consult cable. i know you can use nissan datascan. you could e-mail emance for directions on how to use the consult cable for datalogging $OLD

S14 lower intake manifold with all sensors this was removed from a 97 model $45shipped
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-29-42_77.jpg

S14 cams $30shipped
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-29-24_156.jpg


Aluminum BOV flange-$10 shipped

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-20-50_527.jpg

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-20-41_775.jpg

T2 weldable turbo flange-$OLD

Aluminum BOV c-clamp type flange-$OLD

38/35mm wastegate block off plate-$OLD

RB25det stock turbo manifold $45shipped
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-23-11_218.jpg


Ka24de cast iron top mount manifold IT HAS A FEW CRACKS IN IT!-$35SHIPPED

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-23-49_671.jpg

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-25-05_518.jpg



ka24de steel manifold $OLD

ka24de ebay XTD stage 3 6 puck clutch and pressure plate, it was used hard for about 150 miles on a turbo ka and it would not hold, should be good for a N/A ka. in the pics it shows how much life is left. -$55shipped

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-27-42_664.jpg

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-27-54_765.jpg

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-28-15_651.jpg

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-28-35_337.jpg

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-28-54_222.jpg



ka24de flywheel used hard for 150miles-$40shipped

http://i259.photobucket.com/albums/hh317/mikeg3347/2011-06-23_15-28-03_34.jpg


RB25det stock clutch $45shipped 25,000 miles
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-32-37_695.jpg
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-32-56_450.jpg

Stock ka24de clutch not sure on mileage $35shipped
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-31-34_798.jpg
http://i259.photobucket.com/albums/hh317/mikeg3347/2011-07-05_15-31-21_531.jpg

96 s14 auto ECU-$30shipped

http://i259.photobucket.com/albums/hh317/mikeg3347/S6300090.jpg

s13mike91
07-07-2011, 02:38 PM
Bump!!!!!!!

s13mike91
07-09-2011, 02:55 PM
Last bump!!!

je_decoy
07-10-2011, 05:02 PM
bump up good prices

will_drift_4_food
07-10-2011, 10:34 PM
You haz PM.