dleep25
07-05-2011, 11:14 AM
i have some ka-t stuff that i have been collecting, but i have decided to go bigger now that i have a daily driver and can actually do a real build. all items are in northern california.
pm or text/call 707-616-3980
prices are obo so dont be afraid to make an offer. worse case i say no.
370cc injectors cleaned with new orings
one injector has a small chip from removal but is fine
115 shipped
oil feed line 4an long enough to go from oil sandwich plate to turbo. about 5 feet. banjo fitting on one end and straight connector on the other.
50 shipped-PENDING
oil sandwich plate made by sp engineering very good quality.
75 shipped
emance ecu tuned for 370cc t25 and stock maf. i bought the ecu off another member and it is unknown if the tune works. it was installed in an ecu that was never tested. should be able to just unsolder the bored and put it in a different ecu
50 shipped-Pending
s13 ka24e 5 speed ecu
40 shipped
t25 bottom mount ebay manifold. had a couple stress cracks but will be fixed by a certified welder before shipped out
50 shipped-PENDING
Vortech fmu currently set to 12:1 (got it from a honda guy) never had a chance to buy recalibration disks.
50 shipped
i also have a T3 T25 turbo off of an older z31. it is a very very nice turbo. little to no shaft play, but on the down side i took it to a machine shop to have the exhaust housing removed/ broke free to clock the turbo and the idiot messed up the coolant ports. so you can do one of three thing- dont run coolant, re-tap the ports, or weld a flange over the port. will have pics later. it is at a friends house
200 shipped
pm or text/call 707-616-3980
prices are obo so dont be afraid to make an offer. worse case i say no.
370cc injectors cleaned with new orings
one injector has a small chip from removal but is fine
115 shipped
oil feed line 4an long enough to go from oil sandwich plate to turbo. about 5 feet. banjo fitting on one end and straight connector on the other.
50 shipped-PENDING
oil sandwich plate made by sp engineering very good quality.
75 shipped
emance ecu tuned for 370cc t25 and stock maf. i bought the ecu off another member and it is unknown if the tune works. it was installed in an ecu that was never tested. should be able to just unsolder the bored and put it in a different ecu
50 shipped-Pending
s13 ka24e 5 speed ecu
40 shipped
t25 bottom mount ebay manifold. had a couple stress cracks but will be fixed by a certified welder before shipped out
50 shipped-PENDING
Vortech fmu currently set to 12:1 (got it from a honda guy) never had a chance to buy recalibration disks.
50 shipped
i also have a T3 T25 turbo off of an older z31. it is a very very nice turbo. little to no shaft play, but on the down side i took it to a machine shop to have the exhaust housing removed/ broke free to clock the turbo and the idiot messed up the coolant ports. so you can do one of three thing- dont run coolant, re-tap the ports, or weld a flange over the port. will have pics later. it is at a friends house
200 shipped