S14 rear toe alignment

[scels240]

Well i want my toe to be zero
But .10 and .14 is in the green and the techs
Are saying that is 0
Buy my wheels still looked toed in

Should I make it 0 even tho the machine is saying
That's red

[s13 drifta]

I was looking at my alignment sheet from Les Schwab and it says the rear Specified Range is between 0.00 and 0.23. I was at the alignment machine and it was showing stock was about 0.07. Looks like you are within spec, but I'm not sure how much of a difference it would make if it was zeroed out.

[iamtheyi]

your wheels will look toe in from the side of the car. Look at it straight from the back and even then, it's still sketchy.

You ARE within spec and that little toe won't make a big difference. You don't NEED zero.

[240mike1022]

Yea that's your in spec for the s14 that's how mine is I wouldn't bother messing with it

[murda-c]

you're fine there. the wheels always look toed more than they are because the body is narrower behind the wheel than in front.

[nathanong87]

within spec toe in is fine for tire wear AND probably even better for drifting. DEAL WITH IT

[seeks14]

as long as its in spec you will be fine my good sir =)

[scels240]

Ok
Cool
Ima take a picture tho

[future]

You have to remember whendriving the toe will zero out

[jaked23]

u want slightly neg toe b/c when u accelerate the toe specs will become more positive. just like ^^ said