PBM Pro Coilovers!!!

[260sexways]

Finally got them yesterday but had a question on how to install these bushings. I know they go on the rear coilover but which side??? Either by the knuckle or the opposite side, if someone could help me out that would be awesome.I flipped the taller bushings to show you it tapers toward one side

http://i699.photobucket.com/albums/vv358/blake110491/IMG00377-20110615-1954.jpg
http://i699.photobucket.com/albums/vv358/blake110491/IMG00378-20110615-1955.jpg
http://i699.photobucket.com/albums/vv358/blake110491/IMG00377-20110615-1412.jpg

[godrifttoday]

contact power by max

[260sexways]

There closed right now, i'm wanting to put them on tonight since its not a 1000 degree's, just wanted to see if anyone knew real quick. I know somebody has a pair of these

[roboticnissan]

They only work one way friend.

[boosted KA24DE]

Notice the collers on the left are tapered down, they go on first to sit flush over the angled part of the stud on the lower mount on the rear knuckle. next slide the bottom of the rear coil on then proceed to slip the spacers pictured on the right and thread on the oem nut over stud and lock it all down. Do not fully tighten the top nuts on the rear coils until you slip the bottom on flush it is a tight fit and without proper rear knuckle correction it will feel like it won't go in at first. don't use a hammer!! rubber mallet maybe. Good luck the pro coils are crazy nice to drive in. Just be sure to have a way to safely lower your car down because these go super low. jack might get stuck under body kit!!! make ramps or some provisions to get car out of drive way go slow, like I said these go LOOOOOWWWWW.

[260sexways]

I have factory S14Kouki aero so i'm fine, only issue is my downpipe pushes my exhaust lower than i want it. After i get it re welded i can slam it. These go as low as my silkroads that i just sold by the way, was looking for an updated coilover
Thanks for the help!!!

[260sexways]

Case closed, Lock this shit up!