93' S13 Hatch w/ Built KA24DE

[StryfeS13]

Just offer a price, if it's reasonable I will definitely consider it!

I'm just testing the waters on this. I'm looking for something more practical, and newer so I was going to try to sell this. The motor is LEGIT, very well built, no corners cut.

I have never drifted this car. I don't drift.

UPDATE on this car: I put the turbo kit on yesterday, and there are some kinks that now need to be worked out. I am no longer testing waters, it's for SALE now.

1. Has a slight miss at idle
2. Tinnnnyyy exhaust leak @ v-band
3. BOV is not working properly.

-However, it does go into boost and seems pretty stable the whole RPM range. IDK why it has a miss/etc, but I do not have the time or care to fix it now!

Motor has about 10K miles on it.
Chassis has around 180K

Mods:

Engine:

Compression is 165 PSI across the board
KA24DE
Bored .020" over
Supertech 8.6:1 Forged pistons
Supertech rings
Eagle forged rods
ACL bearings
ARP main studs
ARP head studs
Fel-pro high pressure headgasket
Ported/Polished/Port matched cylinder head
All new gaskets
New valve seals
ISIS Megaphone MBSE Exhaust (Really quiet, even on an N/A KA)
NOOO emissions whatsoever
ETC. legit!

Turbo Setup:

Sunpro boost gauge (not hooked up)
Glowshift oil pressure gauge. (oil pressure exceeds factory specs)
JGS vacuum block
CXRacing T3/T4 top mount manifold (the new one)
Custom downpipe
Holset H1C turbo
CXRacing FMIC kit
Freddy BOV
EFISpecialist Tune
Tomei 555CC injectors
Z32 MAF
Z1 Motorsports stainless steel feed line
Walbro 255 LPH fuel pump

Wheels:

Volk Evolution 3? I think lol

Suspension:

I upgraded the sway bar bushings/end links lol.

Not much, haven't got around to that yet, didnt even see it necessary since I only use it for a DD.

It has shitty ebay coil things on it that aren't very comfortable on the back, and some other coils on the front that aren't ebay.

The bad: cracked windshield, but isn't broken or anything. 2 small cracks on dash. needs paint badly.

http://i1099.photobucket.com/albums/g399/indobingo/turbo1.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4338Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4339Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4341Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4342Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4343Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4344Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4345Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4346Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4348Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4349Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4350Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4347Small.jpg

Rings are gapped for turbo

http://i34.tinypic.com/2s0kzr7.jpg
http://i34.tinypic.com/2dsprah.jpg

ARP main studs and eagle rods

http://i37.tinypic.com/24329sk.jpg

Cylinder wall
http://i35.tinypic.com/vct55j.jpg

Ports/block (notice the porting)

http://i37.tinypic.com/2wrnrz8.jpg
http://i37.tinypic.com/28bcufl.jpg
http://i36.tinypic.com/5mk0g0.jpg
http://i33.tinypic.com/2j26c6v.jpg

No emissions
http://i38.tinypic.com/m93ywn.jpg

[eSThurTeen]

Asking price??

[StryfeS13]

Just testing the waters...so I don't have a firm asking price. Just offer I guess.

I'm open to trades as well but they must be of equal value and I don't want any rotaries or high mileage stock motors lol

[andrew600]

ill give you 1500 for it?

[Kevin920415]

^^dude hardcore

[bgioan]

How does 3.7K sound plus a brand new iPod nano 6gen?

[StryfeS13]

ill give you 1500 for it?

Really dude?

[StryfeS13]

How does 3.7K sound plus a brand new iPod nano 6gen?

I'll take it into consideration. I'd like to see more offers first

[jesse_s13]

How much power are you making, just curious?

[StryfeS13]

With just an N/A KA..? Idk man..it's not fast since the turbo kit isnt on it. But I pull on stock KA's by like a car and a half. I've only ever taken it to 6K rpms

If the turbo kit was on i'd say around the 350 - 380 WHP range...the wastegate is on 16 LBS.

[roboticnissan]

In for partout

[future]

3700!? Wtf id take that in a second for my 40

[andrew600]

you said make offer? how can you be upset when you posted no price?
give a realistic asking price and ill give you a realistic offer

[DreEzed]

It doesn't seem like the OP is mad about the offer. The fact that you want to shit on the guys thread is ridiculous.

[sebastianwrx]

you said make offer? how can you be upset when you posted no price?
give a realistic asking price and ill give you a realistic offer

that aint an offer dud tht just low offer AKA low ballers

[andrew600]

so if i were to offer 12k everyones response would have been what?

[Bambi]

so if i were to offer 12k everyones response would have been what?

gtfo?



Built KA's are awesome and something I want to do instead of going in the sr direction. Anywhooooo this is really great. GLWS!

[andrew600]

i wasnt bashing. i think its a great motor in that car.

[sebastianwrx]

Seriously 1500$ can only get u a s13 with just single cam .. This is fully built motor KA and he spent more than 1500$ easily That just the motor .. 1500$ seriously its not offer its basically u just joke around .. Before u put down 1500$ do me a favor and research how much done to the motor alone plus the wheels and the car itself .. Until than give him the right offer or else seriusly just stfu

[sebastianwrx]

update pics for the turbo kit ..

http://i1099.photobucket.com/albums/g399/indobingo/turbo4.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo3.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo2.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo1.jpg

[limited240]

so is the turbo up and running now..

[dkson31]

how much do you want for it

[ship2236]

Love that motor sir!

[StryfeS13]

so is the turbo up and running now..

Yes. Has a few issues here and there, but it's only been installed for a day...so..

how much do you want for it

Shoot me an offer. Worst I can say is no.

Love that motor sir!

Thanks man. The car is now for sale.

Any reasonable offer will be considered

[StryfeS13]

Bump....

here's a log i was keeping on it so you can see what was done

StryfeS13's Build Thread / KA-T : 240sx General Discussion - Page 8 (http://forums.nicoclub.com/stryfes13-s-build-thread-t493671-280.html)

[xAJAxY]

offer. 37 or 3800
if so id come look at it friday :P

[StryfeS13]

4000 and you can take it. I just replied to your PM as well.

[sebastianwrx]

just took a spin with his car and it was quick as hell ...this car ill say can make a power like around 260-280 easily ..since he doesnt have a boost gauge i dont know how much he's boosting so bump for for this guy car

[StryfeS13]

Even though the exterior isn't pretty, I was thinking I can get somewhere around 4.8K - 5K OBO for this car. I am negotiable on the price but I think that's fair?

I need a more practical car, so I'm selling this.

Motor has about 10K miles on it.
Chassis has around 180K

This car is pretty damn fast. In 3rd gear, you can almost get it maxed out on the speedo. I've never taken it all the way up to it's rev limit (7200) but at 6K rpm in 3rd it's at like 90 MPH.

Im pretty positive if you got like a stage 3/4 clutch and put the other wastegate spring in (16PSI), you'd see anywhere from 350 - 400 WHP.

External wastegate sounds sweeeet!

Mods:

Engine:

Compression is 165 PSI across the board
KA24DE
Bored .020" over
Supertech 8.6:1 Forged pistons
Supertech rings
Eagle forged rods
ACL bearings
ARP main studs
ARP head studs
Fel-pro high pressure headgasket
Ported/Polished/Port matched cylinder head
All new gaskets
New valve seals
ISIS Megaphone MBSE Exhaust (Really quiet, even on an N/A KA)
NOOO emissions whatsoever
Exedy clutch (needs to be changed if you plan on running more boost)
ETC. legit!

Turbo Setup:

Sunpro boost gauge (not hooked up)
Glowshift oil pressure gauge. (oil pressure exceeds factory specs)
JGS vacuum block
CXRacing T3/T4 top mount manifold (the new one)
Custom downpipe
Holset H1C turbo
CXRacing FMIC kit
Freddy BOV
EFISpecialist Tune
Tomei 555CC injectors
Z32 MAF
Z1 Motorsports (http://zilvia.net/f/#) stainless steel feed line
Walbro 255 LPH fuelpump (http://zilvia.net/f/#)

Wheels:

Volk Evolution 3? I think lol

The bad:

- Downpipe hits floorboard and makes the car vibrate upon deceleration while in gear. Annoying, but not harmful.
- TINYYY little exhaust leak
- Needs paint and coilovers
- Cracked windshield, but not terribly bad or anything.
- Needs a bigger radiator. Overheats with the one that is on it. (its the stock radiator with a little 12" e-fan.) Installing a clutch fan would probably even fix the issue.
- Has a miss at idle and sometimes dies at lights, due to atmospheric bov on a draw through setup.
- I think that's it.
- Small oil leak at the pan. REAL small. Like a it'll lose a quart probably every 6 months. So..that's not even a big deal since you should be changing the oil anyway. Lol.

http://i1099.photobucket.com/albums/g399/indobingo/turbo1.jpg
http://i34.tinypic.com/2s0kzr7.jpg
http://i34.tinypic.com/2dsprah.jpg
http://i35.tinypic.com/vct55j.jpg
http://i37.tinypic.com/2wrnrz8.jpg
http://i36.tinypic.com/5mk0g0.jpg
http://i33.tinypic.com/2j26c6v.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4338Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4339Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4341Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4342Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4343Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4344Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4345Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4346Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4350Small.jpg

[StryfeS13]

bump... 4500 takes it?

[headablaze]

I like it, but no money...maybe if you rattle can it, it might sell faster?

[StryfeS13]

Eh, if someone is that concerned about the exterior, then they should go buy a honda :P

It's a freakin 240

[headablaze]

I agree, but unfortunitly most people judge cars on the appearance. Like I said, I'd buy it if I could

[jesse_s13]

Eh, if someone is that concerned about the exterior, then they should go buy a honda :P

It's a freakin 240

:keke:

Nice build. Must be fast. glws sir.

[StryfeS13]

:keke:

Nice build. Must be fast. glws sir.

Yeah man, it's pretty freakin fast. Just don't have the time to work on it.

[edwin23457]

trade for mine? nice and very reliable http://zilvia.net/f/cars-sale/391877-ft-s13-hatch-some-goods.html

[StryfeS13]

Nah sorry man, not interested in another 240sx at the moment

[sebastianwrx]

Nah sorry man, not interested in another 240sx at the moment
trade with handa civic single cam with bike rack, tow hook ,red rota wheels ?..lmk

[StryfeS13]

Lol stfu
go back to your thread before I shit in it like you just did mine!

[onevia drift]

LMFAO! friend of mine... kinda rough around the edges but great guy, fast car!!!! I personaly trust "long necks" build! lmao hey Ricky.... trade me your full ka-t swap for a dumped/clean as fuuuuuuu AE86??

[StryfeS13]

LMFAO! friend of mine... kinda rough around the edges but great guy, fast car!!!! I personaly trust "long necks" build! lmao hey Ricky.... trade me your full ka-t swap for a dumped/clean as fuuuuuuu AE86??

Lol. I'd rather take horseback than drive an AE86...so I'll pass :P

I'm trying to get into some 4X4 action so yeah. Need the money.

[StryfeS13]

Last bump.

[sebastianwrx]

first bump.....

[limited240]

gagging interest. I am looking for a dd ...

[StryfeS13]

To be honest man, this isn't really your typical daily driver the way it sits now.

Needs radiator to keep it cool, and IDK if the exhaust leak/vibration would bother you or not.

[titangts]

those are volk gtu's.. i have them on my miata. nice wheels 2 piece

[bataangpinoy]

im so mad. why is this car on the wrong coast? if i was even 8 hours away, i would have come and got this already.

[limited240]

ac works.??. and to what i read above it should be a easy fix. for the rad, leakage and the vibration... i am currently looking at a subi today if i dont get it il go chek ur car out....

[StryfeS13]

Nah man, no AC. Everything for the AC is completely removed. Sorry :P

Yep, only issues it has, as stated in the very first post:

- Exhaust leak/vibration.
- Needs a bigger radiator. Stock clutch fan will probably fix this too...my electric fan is just too small and not pushing as much as it used to, it seems.
- Has a miss at idle and sometimes dies at lights, due to atmospheric bov on a draw through setup.
- Small oil leak at the pan. REAL small. Like a it'll lose a quart probably every 6 months. So..that's not even a big deal (http://zilvia.net/f/#) since you should be changing the oil anyway. Lol.

[limited240]

thanks for the info. glws..

[conekiller]

dont mean to lowball but would you let it go for 38?

[spartanmisfit]

Very reasonably priced car!

[StryfeS13]

Very reasonably priced car!

Thanks. I really need to sell this now... $4500 is all i want!

dont mean to lowball but would you let it go for 38?

$4500 and you can have it.


I actually think I found out part of the missing issue. I put my 240SX battery into my blazer, and the voltage meter is hopping all over the place.

I wonder if that is part of the idle issue in the 240. Lol if it's THAT easy of a fix that's pretty funny.

[StryfeS13]

Will someone please take this out of my hands lol

[StryfeS13]

Text me @ 559-765-8363

Yes, I'm aware the exterior is ugly and needs paint blah blah whatever. I don't care!!! I didn't drive this car for the looks. I did the motor first and never got around to the cosmetics.

I need money to fund my new project, so I'm selling this. I want $4500.

Motor has about 10K miles on it.
Chassis has around 180K

This car (http://zilvia.net/f/#) is pretty damn fast. In 3rd gear, you can almost get it maxed out on the speedo. I've never taken it all the way up to it's rev limit (7200) but at 6K rpm in 3rd it's at like 90 MPH.

Im pretty positive if you got like a stage 3/4 clutch and put the other wastegate spring in (16PSI), you'd see anywhere from 350 - 400 WHP.

External wastegate sounds sweeeet!

Mods:

Engine:

Compression is 165 PSI across the board
KA24DE
Bored .020" over
Supertech 8.6:1 Forged pistons
Supertech rings
Eagle forged rods
ACL bearings
ARP main studs
ARP head studs
Fel-pro high pressure headgasket
Ported/Polished/Port matched cylinder head
All new gaskets
New valve seals
ISIS Megaphone MBSE Exhaust (Really quiet, even on an N/A KA)
NOOO emissions whatsoever
Exedy clutch (needs to be changed if you plan on running more boost)
ETC. legit!

Turbo Setup:

Sunpro boost gauge (not hooked up)
Glowshift oil pressure gauge. (oil pressure exceeds factory specs)
JGS vacuum block
CXRacing T3/T4 top mount manifold (the new one)
Custom downpipe
Holset H1C turbo
CXRacing FMIC kit
Freddy BOV
EFISpecialist Tune
Tomei 555CC injectors
Z32 MAF
Z1 Motorsports (http://zilvia.net/f/) stainless steel feed line
Walbro 255 LPH fuelpump (http://zilvia.net/f/)

Wheels:

Volk Evolution 3? I think lol

The bad:

- Downpipe hits floorboard and vibrates while decelerating.
- TINYYY little exhaust leak.
- Needs paint if you're a perfectionist.
- Cracked windshield, very minimal. It's not spidered or anything.
- Needs a clutch fan. My cheapy e-fan is going out and it gets HOT fast.
- Has a miss at idle and sometimes dies at lights, due to atmospheric bov on a draw through setup.
- Small oil leak at the pan. REAL small. Like a it'll lose a quart probably every 6 months. So..that's not even a big deal since you should be changing the oil anyway. Lol.

http://i1177.photobucket.com/albums/x343/Sickfire/photo.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo8.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo7.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo6.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo2.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo1.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo3-1.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4350Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4346Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4343Small.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo1.jpg
http://i34.tinypic.com/2s0kzr7.jpg
http://i34.tinypic.com/2dsprah.jpg
http://i35.tinypic.com/vct55j.jpg
http://i37.tinypic.com/2wrnrz8.jpg
http://i36.tinypic.com/5mk0g0.jpg
http://i33.tinypic.com/2j26c6v.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4338Small.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4350Small.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo4.jpg

[kouness]

Sick car, Didnt know there was one like that rolling around town..

[sebastianwrx]

yea sick car that will get u heart attack cuz its too fast lol

[limited240]

so did the battery fix the the idle problem.. just wondering..

[StryfeS13]

Dunno. didnt try. Im gonna make a video today of the car

[racerx2k1]

update pics for the turbo kit ..



Bump....

here's a log i was keeping on it so you can see what was done

StryfeS13's Build Thread / KA-T : 240sx General Discussion - Page 8 (http://forums.nicoclub.com/stryfes13-s-build-thread-t493671-280.html)

bump... 4500 takes it?

Last bump.

Will someone please take this out of my hands lol

2 bump limit. You can start new thread in 3 days.