S14 wheel offset?!?!?!?

[samgs14]

hey everybody!! I am new to the site and I am currently building a S14 and do not want play a guessing game when buying a set of wheels, that said it is going to be a 6.0L LS series t56 chevy drivetrain Looking for something around a 10.5" rear and 8.5-9.5" and not looking to run extreme camber angles the car will have full suspension and will be capable of all camber adjustment... Just looking for a good clean flush fit! any Ideas or suggestions Id appreciate all the advise you all have thanks

[samgs14]

so I realize these arent the best offsets but I just came across a decent deal on some work VS-SS
F 17x8 +30
R 17x9 +35
tell me what you think

[CaptainVlad]

Go look at the wheel fitment thread at least.

Those sizes suck...

[camaro379ss]

http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread-stretch-flush-no-specs-no-post.html?highlight=wheel+fitment

[g00se]

you can check out varrstoens they seem like they come in the sizes that you are looking for. 18x9.5 +12 and 18x10.5 +15. the problem is that with a wheel that wide you do need a roll pull depending on your tire size.

[samgs14]

thanks for the advise guys I ended up winning the work VS-SS wheels threw out an offer I never thought would be accepted so now I guess Ill just have to fit them on and run spacers :(... not all bad still sick ass looking wheels!! http://www.vrwheels.com/images/A_6204.JPG

[atomicguy7]

some spacers would help, nice set of wheels tho

[Promise Land]

ok, so why do they suck? You can run a 255 rear tire with the +35 offset and it will roughly flush and the front will be close.

I like the wheels though.

[samgs14]

That's what I was hoping for is a 255 rear and maybe a 235 front as long as it's close I can deal with a small spacer to get the exact fitment... Like I said too good of a deal to pass up on I Paid 1000 shipped for the wheels thanks for the compliments Ill try to post some pictures of them on the car when I get them!!

[McSlides]

A +20 offset for the rear on an S14 is pretty flush without any roll on your quarter panels. On the fron i would go with at least -0. Take whatever your offsets are now and adding spacers to it in order to get the offset you want.

[McSlides]

Also since you have full suspension, im guessing coilovers, your wheels are going to rub on your coils and not clear them with those offsets. So you will deffinitely need a spacer.

[Phlip]

So you didn’t search effectively, had already bought something and asked anyway?
I would advise to check the above-linked wheel fitment thread if you still have questions, and to make sure you’re looking for information from here forward.