S15 SR, Fully Built Parts, S13 Shell, 6-Speed SR Trans Etc.

[Broadfield]

I bought the following from a good friend of mine to help him out of a jam. I got a good deal, so I simply want to resell it for a little profit. And actually, this was originally the built setup I was going to buy before I decided to go the LS3 route.

NOTE: Since I am out of space at my house and shop, I am storing all of it at a friends shop out of town. So please allow up to a week, after purchase, in order for me to go get the purchased item and get it boxed up and shipped. Feel free to contact me to try and make special arrangements for faster shipping. My friend makes the trip in town quite often, so he may be able to bring the purchased item to me quickly.

Please contact me for shipping quotes.

All of the motor items; block, head, internals have been stored in a humidity controlled room.

Freshly Prepped S15 SR short block decked, cleaned and bored for CP Pistons listed below. Includes Crank $399 SOLD!!!

Freshly Turned S15 Crank


http://images12.fotki.com/v611/photos/2/47612/9731009/IMG_2389-vi.jpg

http://images45.fotki.com/v153/photos/2/47612/9731009/IMG_2390-vi.jpg



Freshly Prepped S15 SR head: Decked, cleaned and 3-angle valve job: $399 SOLD!!!

Includes the following new items installed

Brian Crower Valve Springs
Brian Crower Titanium Retainers


http://images45.fotki.com/v153/photos/2/47612/9731009/IMG_2399-vi.jpg

http://images18.fotki.com/v340/photos/2/47612/9731009/IMG_2418-vi.jpg



BNIB CP Forged Pistons SC7325 86.5mm 9:1: $449

http://images53.fotki.com/v138/photos/2/47612/9731009/IMG_2402-vi.jpg

http://images55.fotki.com/v608/photos/2/47612/9731009/IMG_2405-vi.jpg

http://images9.fotki.com/v131/photos/2/47612/9731009/IMG_2404-vi.jpg




BNIB Eagle CRS5365N3D SR20 Chromoly Forged Connecting Rods: $269 SOLD!!!!

http://images58.fotki.com/v513/photos/2/47612/9731009/IMG_2406-vi.jpg

http://images59.fotki.com/v111/photos/2/47612/9731009/IMG_2407-vi.jpg



BNIB Mazworx MAZ 11002 Main Stud Kit: $157 SOLD!!!!

http://images58.fotki.com/v511/photos/2/47612/9731009/IMG_2408-vi.jpg

http://images17.fotki.com/v521/photos/2/47612/9731009/IMG_2409-vi.jpg



BNIB Brian Crower BC0202 Stage 2 S13 Camshafts: $259 SOLD!!!

http://images58.fotki.com/v511/photos/2/47612/9731009/IMG_2398-vi.jpg

http://images39.fotki.com/v1283/photos/2/47612/9731009/IMG_2397-vi.jpg



BNIB Tomei 13024R310 Adjustable Camshaft Gear: $135

http://images17.fotki.com/v147/photos/2/47612/9731009/IMG_2396-vi.jpg

http://images58.fotki.com/v506/photos/2/47612/9731009/IMG_2395-vi.jpg



BNIB OEM Nissan Water Pump Assembly: $45 SOLD!!!!

http://images17.fotki.com/v147/photos/2/47612/9731009/IMG_2410-vi.jpg




BNIB Nismo 21200-RS520 Colder Thermostat: $55 SOLD!!!!

http://images21.fotki.com/v847/photos/2/47612/9731009/IMG_2413-vi.jpg



BNIB Full Timing Chain Kit: $119 SOLD!!!

http://images108.fotki.com/v613/photos/2/47612/9731009/IMG_2394-vi.jpg



BNIB 8 OEM Nissan 13234-53J01 Lifters/Pivot Rockers: $199

http://images9.fotki.com/v131/photos/2/47612/9731009/IMG_2414-vi.jpg



BNIB OEM NIssan 13257-53J03 Rocker Arms: $189

http://images55.fotki.com/v608/photos/2/47612/9731009/IMG_2415-vi.jpg



BNIB RP Sports SR20 Digital Valve Shim Tool: $145

http://images108.fotki.com/v613/photos/2/47612/9731009/IMG_2470-vi.jpg

http://images108.fotki.com/v105/photos/2/47612/9731009/IMG_2474-vi.jpg



BNIB ARP 102-4701 Head Stud Kit: $109 SOLD!!!!

http://images17.fotki.com/v10/photos/2/47612/9731009/IMG_2421-vi.jpg

http://images17.fotki.com/v521/photos/2/47612/9731009/IMG_2422-vi.jpg



BNIB Circuit Sports RAS-SR1345-PH: $39 SOLD!!!!

http://images108.fotki.com/v613/photos/2/47612/9731009/IMG_2424-vi.jpg



BNIB Cosworth 20000924 Head Gasket 87mm ^ 1.1mm: $119 SOLD!!!!

http://images30.fotki.com/v476/photos/2/47612/9731009/IMG_2426-vi.jpg

http://images45.fotki.com/v148/photos/2/47612/9731009/IMG_2425-vi.jpg



BNIB OEM Nissan Full Gasket Kit: $129

http://images12.fotki.com/v155/photos/2/47612/9731009/IMG_2427-vi.jpg

http://images12.fotki.com/v155/photos/2/47612/9731009/IMG_2563-vi.jpg



BNIB Clevite TW-590S Thrust Washer Set: $44

http://images18.fotki.com/v340/photos/2/47612/9731009/IMG_2411-vi.jpg



BNIB Clevite CB-1629 P-.25mm Rod Bearing Set: $44

http://images50.fotki.com/v1530/photos/2/47612/9731009/IMG_2428-vi.jpg



BNIB Clevite MS-2015P-.25mm Main Bearing Set: $50

http://images58.fotki.com/v506/photos/2/47612/9731009/IMG_2430-vi.jpg



BNIB Wiring Specialties S15 SR - S13 Chassis upper and lower harness: $255

http://images45.fotki.com/v1359/photos/2/47612/9731009/IMG_2431-vi.jpg

http://images56.fotki.com/v127/photos/2/47612/9731009/IMG_2432-vi.jpg



Stock S15 SR20DET Parts: Make offer unless noted


T28 Turbo w/manifold: $300 SOLD!!!
Upper Manifold SOLD!!!
Lower Manifold SOLD!!!
Starter SOLD!!!
Alternator SOLD!!!
Power Steering Pump w/reservoir(both are from a S14 KA)
6-Speed: $400
Clutch
S15 ECU x 2


http://images52.fotki.com/v637/photos/2/47612/9731009/IMG_2381-vi.jpg

http://images112.fotki.com/v233/photos/2/47612/9731009/IMG_2380-vi.jpg




Greddy V-Spec Core Only: $400

http://images24.fotki.com/v825/photos/2/47612/9485407/IMG_0199-vi.jpg

http://images107.fotki.com/v67/photos/2/47612/9485407/IMG_0219-vi.jpg



LHD Nissan Nabco BM50 1" Brake Master Cylinder Non-ABS: $115 SOLD!!!!
(Mint condition. Note: this is for non-ABS cars. Already has 3rd fitting pressed in... it's ready to go.)

http://images114.fotki.com/v646/photos/2/47612/9485407/IMG_0769-vi.jpg

http://images45.fotki.com/v148/photos/2/47612/9485407/IMG_0768-vi.jpg




Polished Golden Eagle Vacuum Box: $29
(Earls fittings and/or lines are extra. Contact me if you want to discuss it)

http://images59.fotki.com/v111/photos/2/47612/9485407/IMG_0291-vi.jpg




Unknown Downpipe: $80

http://images53.fotki.com/v140/photos/2/47612/9731009/IMG_2571-vi.jpg




Apexi GT-Spec Exhaust: $250

http://images17.fotki.com/v147/photos/2/47612/9731009/IMG_2384-vi.jpg



Unknown Steel Driveshaft for 6-speed into S13 chassis: $100

http://images52.fotki.com/v637/photos/2/47612/9731009/IMG_2385-vi.jpg



Koyo Radiator: $150

http://images57.fotki.com/v139/photos/2/47612/9731009/IMG_2386-vi.jpg



Apexi Filter kit w/S15 MAF and elbow: $50 SOLD!!!

http://images9.fotki.com/v120/photos/2/47612/9731009/IMG_2387-vi.jpg

http://images9.fotki.com/v120/photos/2/47612/9731009/IMG_2388-vi.jpg



S13 1989 Hatch Roller: Make offer! I will not part out... I don't even want to mess with it nor do I have the time.


Includes S15 HLSD and S15 housing
Pretty clean interior... near flawless dash
Probably needs new brakes and ignition cylinder
No back seat
Does include head light trim
So pretty much everything except for drive train and a back seat.


http://images9.fotki.com/v120/photos/2/47612/9731009/IMG_2383-vi.jpg

http://images112.fotki.com/v106/photos/2/47612/9731009/IMG_2378-vi.jpg

http://images57.fotki.com/v283/photos/2/47612/9731009/IMG_2377-vi.jpg

[signals13]

I'll take the pignose front lip how much shipped to 89110?

[Discoballer]

You sir have a PM

[Drift_86]

Mannnn you got some sexy parts for sale! I probably don't have enough money to ship the exhaust but how much to ship 90280

[BlackTruenoAE86]

PM'd you paypal ready

[whats_a_sr20]

holy shat 6 speeds are selling cheap i hope when i need i will find one.

[kyles1988]

Man I should have jumped on that turbo faster. Bump!

[Edwin562]

wow lots of great parts... should sell quick :)

[import_z]

koyo radiator how much shipped to my adress Brossard, Quebec?

[g_mac530]

Toby, do you know the condition of the PS Pump? My car squeals pretty loud at start up. I'm suspecting the pump is starting to go. And i'm guessing it would be a direct bolt on to an s13 sr.

[Nicelyphe]

PM me if you end up parting out the shell, Im looking for both front fenders shipped 18103. TY

[Broadfield]

Mannnn you got some sexy parts for sale! I probably don't have enough money to ship the exhaust but how much to ship 90280

Probably around $80

koyo radiator how much shipped to my adress Brossard, Quebec?

It would be $70 to ship it.

Toby, do you know the condition of the PS Pump? My car squeals pretty loud at start up. I'm suspecting the pump is starting to go. And i'm guessing it would be a direct bolt on to an s13 sr.

Sorry I do not know the exact condition.

PM me if you end up parting out the shell, Im looking for both front fenders shipped 18103. TY

I won't be shipping fenders.... which is the reason I do not want to part it. I shipped my Silvia fenders and it was a total pain in the ass. Expensive and difficult to pack up properly. I'd sell the whole damn car for several hundred dollars..... the rear-end alone is almost worth that. Someone just needs to come pick it up. I simply do not have the time to mess with it.... Sorry!

[Ethan Hunt]

How much for the ecu's?

[epics13]

If the gasket it Is for an s13 sr n includes the following I'll take it,

Brand new OEM SR20DET Engine Gasket Kit. Comes with everything you need for a complete engine rebuild.* See list below to find out what is in this kit.* Please specify your motor when ordering.
Gasket – F.I.P. (150g)
Gasket – Cylinder Head
Gasket – A.A.C. Valve
Gasket – Collector Intake
Gasket – Intake Manifold
Gasket – Exhaust Manifold
Gasket – Turbo Charger Inlet
Gasket – Turbo Charger Outlet
Gasket – Inlet Tube Air
Gasket – Inlet Tube
Gasket – Oil Tube Inlet
Gasket – Connector Water
Gasket – Oil Tube Outlet
Gasket – Oil Filler Cap
Gasket – Chain Tensioner
Gasket – Rocker Cover
Gasket – Throttle Chamber
Oil Seal – Crankshaft Rear
Oil Seal – Valve Exhaust
Oil Seal – Valve Intake
Oil Seal – Crankshaft Front
O-Ring – Oil Strainer
O-Ring – Sear
O-Ring – Injector Upper
O-Ring – Seal
O-Ring – Injector Lower
O-Ring – Support Distributor
Washer – Drain Plug

[epics13]

Double post

[Broadfield]

How much for the ecu's?

$90 each or $150 for both.

If the gasket it Is for an s13 sr n includes the following I'll take it,


The kit is for an S15 SR... so some will be the same and some won't.... sorry.

[sr20drifter1]

You're just full of surprises, aren't you? Where did this hatch come from?GLWS. Thanks for the oil catch can. I really love it.

[jdmRB2011]

how much for the roller are the frame rails rusted??

[Broadfield]

how much for the roller are the frame rails rusted??

As far as I could tell, only in the area where it is shown in this pic. They are not horrible, but probably a little worse than just surface rust. If you are serious I can always try to get some better pics of the specific areas. Or if you are close you can just come look and make your own conclusion. Because my definition of shitty may be different than yours. I would take $500.... which the rear-end alone is worth that much.

http://images57.fotki.com/v283/photos/2/47612/9731009/IMG_2377-vi.jpg

Let me know if you want to come take a look.

Toby

[jdmRB2011]

It's not that bad but I live 2 1/2 hours away from normal,il that's were your located rite?

[JDM_Tuner]

is the water pump for s14 sr? pm me i need one asap

[Broadfield]

is the water pump for s14 sr? pm me i need one asap

Yes, S14 and S15 would the same.

[skyryder2005]

how much to shipped the greedy intercooler to 32566?

[Broadfield]

how much to shipped the greedy intercooler to 32566?

It would be about $25 to ship it. I would do it for $410 shipped.

[Propaganda]

tomei cam gear 140 shipped to 29445?

[nachos14]

s15 block work with red top? if so shipping quote to 92336

[Broadfield]

tomei cam gear 140 shipped to 29445?

I can do that.

s15 block work with red top? if so shipping quote to 92336

Yes, all SR blocks are the same.... it's the head that's different from the S13 to the S14/15's.

For the shipping, is it going to a business or residential? Do you need lift gate service? As long as you have a friend you should be able to lift it off the trailer. Just so you know it's a little cheaper to ship to a business.

[Broadfield]

Bump!!!!!!

[lilpiton]

interested in the s15 ecu. still have it.
well im writing this for a buddy of mine, he need one
how much shipped to 60638
and are the both know to work properly?

[Broadfield]

interested in the s15 ecu. still have it.
well im writing this for a buddy of mine, he need one
how much shipped to 60638
and are the both know to work properly?

Yes, they both work. PM sent.

[Flicktitty]

Still got that shell?

[Broadfield]

Still got that shell?

Yes sir. I would let it go for like $500. Hell, the rear-end is worth that much.

[lilpiton]

no PM revived ^^^

[Broadfield]

no PM revived ^^^

Oh, I had another member PM me from the same exact zip code.... I didn't look at either of your screen names and just assumed it was you that posted and PM'd me.

I assume that was your friend that PM'd me then!?! If not, $125 shipped and yes they both work fine.

[h11m1vn]

Interested in the nismo thermostat pm sent

[richmond82]

Vaccum Box to 97501 ?


S15 SR, Fully Built Parts, S13 Shell, 6-Speed SR Trans Etc.
I bought the following from a good friend of mine to help him out of a jam. I got a good deal, so I simply want to resell it for a little profit. And actually, this was originally the built setup I was going to buy before I decided to go the LS3 route.

NOTE: Since I am out of space at my house and shop, I am storing all of it at a friends shop out of town. So please allow up to a week, after purchase, in order for me to go get the purchased item and get it boxed up and shipped. Feel free to contact me to try and make special arrangements for faster shipping. My friend makes the trip in town quite often, so he may be able to bring the purchased item to me quickly.

Please contact me for shipping quotes.

All of the motor items; block, head, internals have been stored in a humidity controlled room.

Freshly Prepped S15 SR short block decked, cleaned and bored for CP Pistons listed below. Includes Crank $399 SOLD!!!
Freshly Turned S15 Crank







Freshly Prepped S15 SR head: Decked, cleaned and 3-angle valve job: $399 SOLD!!!

Includes the following new items installed
Brian Crower Valve Springs
Brian Crower Titanium Retainers







BNIB CP Forged Pistons SC7325 86.5mm 9:1: $449










BNIB Eagle CRS5365N3D SR20 Chromoly Forged Connecting Rods: $269 SOLD!!!!







BNIB Mazworx MAZ 11002 Main Stud Kit: $157







BNIB Brian Crower BC0202 Stage 2 S13 Camshafts: $259 SOLD!!!







BNIB Tomei 13024R310 Adjustable Camshaft Gear: $135







BNIB OEM Nissan Water Pump Assembly: $45 SOLD!!!!






BNIB Nismo 21200-RS520 Colder Thermostat: $55





BNIB Full Timing Chain Kit: $119 SOLD!!!





BNIB 8 OEM Nissan 13234-53J01 Lifters/Pivot Rockers: $199





BNIB OEM NIssan 13257-53J03 Rocker Arms: $189





BNIB RP Sports SR20 Digital Valve Shim Tool: $145







BNIB ARP 102-4701 Head Stud Kit: $109 SOLD!!!!







BNIB Circuit Sports RAS-SR1345-PH: $39 SOLD!!!!





BNIB Cosworth 20000924 Head Gasket 87mm ^ 1.1mm: $119 SOLD!!!!







BNIB OEM Nissan Full Gasket Kit: $129







BNIB Clevite TW-590S Thrust Washer Set: $44





BNIB Clevite CB-1629 P-.25mm Rod Bearing Set: $44





BNIB Clevite MS-2015P-.25mm Main Bearing Set: $50





BNIB Wiring Specialties S15 SR - S13 Chassis upper and lower harness: $255







Stock S15 SR20DET Parts: Make offer unless noted
T28 Turbo w/manifold: $300 SOLD!!!
Upper Manifold
Lower Manifold
Starter
Alternator
Power Steering Pump w/reservoir(both are from a S14 KA)
6-Speed: $400
Clutch
S15 ECU x 2








Greddy V-Spec Core Only: $400







LHD Nissan Nabco BM50 1" Brake Master Cylinder Non-ABS: $115 SOLD!!!!
(Mint condition. Note: this is for non-ABS cars. Already has 3rd fitting pressed in... it's ready to go.)








Polished Golden Eagle Vacuum Box: $29
(Earls fittings and/or lines are extra. Contact me if you want to discuss it)

[richmond82]

Accidental Paste Overkill-

[Broadfield]

Interested in the nismo thermostat pm sent

PM sent

Vaccum Box to 97501 ?


I can do $35 shipped.

[richmond82]

Polished Golden Eagle Vacuum Box: $29
very interested how much to ship to 97501 ?

[Broadfield]

Polished Golden Eagle Vacuum Box: $29
very interested how much to ship to 97501 ?

Uhhhh, I answered you in my previous post!?!

[crunkride]

Part HLSD? Please PM...

[lilpiton]

interested in that pignose lip of that shell.
willing to sell it? how much? im in chicago so possibly can pick it up...

[Broadfield]

Part HLSD? Please PM...

As of right now, I'm only parting out the entire rear end/sub frame assembly... $500

interested in that pignose lip of that shell.
willing to sell it? how much? im in chicago so possibly can pick it up...

Yes, $50 picked up.