hear_no_evo
05-01-2011, 12:28 PM
this is my getting out of the game for a while sale, so as the saying goes my loss is your gain.
all of the following prices do not include shipping or paypal fees (unless noted)
I am also willing to make package deals (http://zilvia.net/f/#) for better discounts so please feel free to send me a pm
txt anytime 502-548-6246 Joe
kouki hatch (http://zilvia.net/f/#) tail lights
425 shipped in 48 states and pp included
does not include lower metal garnish
no cracks or leaks and comes with bulbs
retail is $600 for used with garnish and garnish is $100 shipped
pair of 4pt cam lock Sparco harness
200firm or 100 a piece (shipping would be 10 per or 10 for both plus 3 for pp)
still in spec, no stains or tears
purchased early 2010
retail $200 a piece
18x9.5 +12 FN01 wheels and tires 95% tread left
900obo
gunmetal gray
not forged
50mm hub centric 5 lug spacers unknown mileage
60 shipped for the pair
all the studs will need to be replaced because some idiot impacted the wrong lug nuts on
studs range from $2-$9 a stud depending on length
retail $120 for pair
Stich welded, gutted, and caged shell; chassis harness has already been tucked along with brake lines
600obo
clean and clear ky title in hand
also includes rear Bmagic 50mm widebody installed (will need to be redone bc bondo is cracking)
as well as Bmagic rear bumper and side skirts
no body or chassis rust
spl aluminum subframe bushings
spl aluminum steering colum insert
all bushings replaced with energy suspension (http://zilvia.net/f/#) poly bushings
most of the sound deadening has been removed (only bit left is on transmission tunnel)
battery box relocated to center rear where rear seats used to be
fuse panel is center mounted for easy access
windshield has huge crack in it
dash panel has been clean and stripped to bare plastic so no more dash cracking to worry about
will not be a rolling chassis unless i can find some stock suspension parts to put back on
i can borrow a buddies suspension and spare to load it on the trailer and unload it but will need
to remove it once its on the ground
if car does not sell in a few months then i may cut the cage out and scrap the car is anyone wants to purchase
the roll cage for 300
it was a custom (http://zilvia.net/f/#) welded cage not store baught bolt in
badging has been stripped and repainted so i will have to sell as unknown brand RUCA's
85 shipped in 48 states and pp included
badging has been stripped and repainted so i will have to sell as unknown brand traction (http://zilvia.net/f/#) arms
55 shipped in 48 states and pp included
ebay front and rear strut bars
20firm
never used bronze color
retail $50
tail light
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199892_517379222518_178700954_30441267_2171192_n.j pg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash1/17835_508836467268_178700954_30294789_1226915_n.jp g
all of the following prices do not include shipping or paypal fees (unless noted)
I am also willing to make package deals (http://zilvia.net/f/#) for better discounts so please feel free to send me a pm
txt anytime 502-548-6246 Joe
kouki hatch (http://zilvia.net/f/#) tail lights
425 shipped in 48 states and pp included
does not include lower metal garnish
no cracks or leaks and comes with bulbs
retail is $600 for used with garnish and garnish is $100 shipped
pair of 4pt cam lock Sparco harness
200firm or 100 a piece (shipping would be 10 per or 10 for both plus 3 for pp)
still in spec, no stains or tears
purchased early 2010
retail $200 a piece
18x9.5 +12 FN01 wheels and tires 95% tread left
900obo
gunmetal gray
not forged
50mm hub centric 5 lug spacers unknown mileage
60 shipped for the pair
all the studs will need to be replaced because some idiot impacted the wrong lug nuts on
studs range from $2-$9 a stud depending on length
retail $120 for pair
Stich welded, gutted, and caged shell; chassis harness has already been tucked along with brake lines
600obo
clean and clear ky title in hand
also includes rear Bmagic 50mm widebody installed (will need to be redone bc bondo is cracking)
as well as Bmagic rear bumper and side skirts
no body or chassis rust
spl aluminum subframe bushings
spl aluminum steering colum insert
all bushings replaced with energy suspension (http://zilvia.net/f/#) poly bushings
most of the sound deadening has been removed (only bit left is on transmission tunnel)
battery box relocated to center rear where rear seats used to be
fuse panel is center mounted for easy access
windshield has huge crack in it
dash panel has been clean and stripped to bare plastic so no more dash cracking to worry about
will not be a rolling chassis unless i can find some stock suspension parts to put back on
i can borrow a buddies suspension and spare to load it on the trailer and unload it but will need
to remove it once its on the ground
if car does not sell in a few months then i may cut the cage out and scrap the car is anyone wants to purchase
the roll cage for 300
it was a custom (http://zilvia.net/f/#) welded cage not store baught bolt in
badging has been stripped and repainted so i will have to sell as unknown brand RUCA's
85 shipped in 48 states and pp included
badging has been stripped and repainted so i will have to sell as unknown brand traction (http://zilvia.net/f/#) arms
55 shipped in 48 states and pp included
ebay front and rear strut bars
20firm
never used bronze color
retail $50
tail light
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199892_517379222518_178700954_30441267_2171192_n.j pg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash1/17835_508836467268_178700954_30294789_1226915_n.jp g