jorgezee1
04-30-2011, 07:52 PM
s13/s14 sr20det cp pistons 87mm nitrate treated. - 300.00
These were used on my first sr build. they have about 1000 miles on them. pulled the block apart when I started hearing a noise. the head turned out to be cracked scrapped the head and ended up buy a whole new built bottom end. I was going to build a s13sr with them but decide not move foward with it. It comes with rings but I highly recommend buy new ones.
EXTRA PARTS FOR LOCAL BUYERS
If your LOCAL ONLY - if you buy these pistons You can have a spare s13 SR Block and Crank I have sitting around. I was going to sell them but I need to start getting this stuff out of my garage. You can send this block and crank to the shop and get everything machined and have a stout bottom end capable to handle 400+ hP easy. You will need to buy rods I recommend Eagle H-Beam rods but you can use stock ones
Block and Crank are STD. and will need to be cleaned up before using. both are in good condition and can be used for a rebuild.
any questions feel free to ask
CP Pistons #7328
specs can be found here
CP Pistons SC7328 Nissan SR20DET 87.0mm/8.5:1 (http://www.frsport.com/CP-Pistons-SC7328-Nissan-SR20DET-87-0mm-8-5-1_p_8507.html)
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/for_sale_pics052.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/for_sale_pics053.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/for_sale_pics055.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/iphone_pics_010711072-Copy2.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/sale001.jpg
These were used on my first sr build. they have about 1000 miles on them. pulled the block apart when I started hearing a noise. the head turned out to be cracked scrapped the head and ended up buy a whole new built bottom end. I was going to build a s13sr with them but decide not move foward with it. It comes with rings but I highly recommend buy new ones.
EXTRA PARTS FOR LOCAL BUYERS
If your LOCAL ONLY - if you buy these pistons You can have a spare s13 SR Block and Crank I have sitting around. I was going to sell them but I need to start getting this stuff out of my garage. You can send this block and crank to the shop and get everything machined and have a stout bottom end capable to handle 400+ hP easy. You will need to buy rods I recommend Eagle H-Beam rods but you can use stock ones
Block and Crank are STD. and will need to be cleaned up before using. both are in good condition and can be used for a rebuild.
any questions feel free to ask
CP Pistons #7328
specs can be found here
CP Pistons SC7328 Nissan SR20DET 87.0mm/8.5:1 (http://www.frsport.com/CP-Pistons-SC7328-Nissan-SR20DET-87-0mm-8-5-1_p_8507.html)
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/for_sale_pics052.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/for_sale_pics053.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/for_sale_pics055.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/iphone_pics_010711072-Copy2.jpg
http://i689.photobucket.com/albums/vv255/jorgezee1/240sx%20SALES/sale001.jpg