TOMEI GUY-S13
04-24-2011, 01:47 PM
I have a completely stock empty block ready to be machined. Its an s14 block and comes with all 5 main caps and main gridle. And i have a completely built S14 Head. The head is complete and ready to bolt on. Here are the details on the head....
Internals include:
HKS 264 Step 2 cams(made for S14 to retain VCT)
KMS titanium Retainers
SI Industry 21-4n stainless steel valves
SI Industry Viton valve stem seals
SI Industry manganese bronze valve guides
Comp valve springs
Cam oiler tubes
Cam caps
Rocker Arms
Port and polished Intake and Exhaust Ports.
All shims are on and been shimmed to the factory spec of .001"
The head has been decked .003"
It has a 3 angle valve job with 45* seating angle, and the exhaust valves have been converted from 7mm to 6mm to lighten the valvetrain and provide better flow.
The head has been flow tested to increase flow by 15% on the exhaust side and 12% on the intake side.
Comes with everything including camgears vct gear, vct solenoid and s14 water neck.
Starting price is 1200 OBO SHIPPED.
AND I HAVE A FEW LITTLE THINGS AS WELL
S14 6 BOLT AXLE 40 BUCKS
S14 SR INTAKE MANIFOLD 30 BUCKS
RS-R LOWERING SPRINGS 80 BUCKS
S13 P.S RACK 100 BUCKS SHIPPED
S13 INNER/OUTER TIERODS 30 BUCKS
Internals include:
HKS 264 Step 2 cams(made for S14 to retain VCT)
KMS titanium Retainers
SI Industry 21-4n stainless steel valves
SI Industry Viton valve stem seals
SI Industry manganese bronze valve guides
Comp valve springs
Cam oiler tubes
Cam caps
Rocker Arms
Port and polished Intake and Exhaust Ports.
All shims are on and been shimmed to the factory spec of .001"
The head has been decked .003"
It has a 3 angle valve job with 45* seating angle, and the exhaust valves have been converted from 7mm to 6mm to lighten the valvetrain and provide better flow.
The head has been flow tested to increase flow by 15% on the exhaust side and 12% on the intake side.
Comes with everything including camgears vct gear, vct solenoid and s14 water neck.
Starting price is 1200 OBO SHIPPED.
AND I HAVE A FEW LITTLE THINGS AS WELL
S14 6 BOLT AXLE 40 BUCKS
S14 SR INTAKE MANIFOLD 30 BUCKS
RS-R LOWERING SPRINGS 80 BUCKS
S13 P.S RACK 100 BUCKS SHIPPED
S13 INNER/OUTER TIERODS 30 BUCKS