KA24DE No oil pressure

[chapin323]

I just recently changed tensioners and oil pump but I'm not getting any oil pressure? Any suggestions:rant2:

[usmcgetsome]

check your oil pickup. How are you verifying that you do not have any oil pressure? What oil weight are u using?

[AS240]

did you install the little o-ring seal that goes between the oil pump and the block?
its one of these seals
www.ka-t.org :: View topic - oil pump gaskets? (http://www.ka-t.org/forums/viewtopic.php?t=12161&highlight=oil+pump+gaskets)

[chapin323]

Yes I installed the O-ring and when we ran the car the oil pan was cold and when we took of the valve cover the cams were dry. The nissan dealer from house sold the o-ring by itself

[chapin323]

sorry oil weight 10-40

[cotbu]

always attempt to build pressure, before you actually start up the engine.
re-lube the cams and pull fuel pump fuse yada yada, Optimus prime that bad boy if you have too.

[chapin323]

Ok ill try this weekend see if that helps thanx