Custom Intake Manifold Injectors? Help

[Musezik]

So I have a ka24de custom intake manifold and I need to know what kind of injectors should I install in them.


Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting (http://tinypic.com/r/331dbm1/7)


Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting (http://tinypic.com/r/mbijgk/7)

[Musezik]

Thanks to who helps me.

[Pro ViZIon]

Your gonna need top feed fuel injectors.

Look into getting some RC Engineering ones.

Is this going to be ka-t?

[jr_ss]

You need to measure the ID of the lower seat and upper seats. You'll have to figure it out from there. They are probably standard Bosch style injectors which you can get anywhere. RC's have that style injector.

[Pro ViZIon]

And if your on a budget you can get some 680cc injectors from the first generation gsl-se rx-7.

[Musezik]

Thanks Everybody. The only reason I asked is because my stock sr20 injectors didn't fit. They were too short or stubby. However you wanna call it and it didn't sit well.

[Pro ViZIon]

They wouldn't have worked even if they fit since they are side feed injectors.

[Musezik]

Dammit. This is my first time owning a 240 so sorry. haha. Well I guess I learn something new. Thanks.

[JuMPiiN]

Who made the manifold ? Im sure they could tell you what size injectors you need.

[Musezik]

Also about the fuel stuff am I suppose to buy a aftermarket fuel pressure regulator and some new type of steel braided lines?

[JuMPiiN]

you dont really need SS lines, there better but you dont NEED them, you should def get a FPR if your upping the injectors.

[Pro ViZIon]

Like JuMPiiN said. But for the fpr if your only going for a stockie like sr setup an adjustable fpr won't be necessary. You will need a rom tune however. Also make sure to get a walbro pump if you don't already have one.

[jr_ss]

You're best bet being that you're 17, sell the manifold and keep your stock one. You don't have the funds to build a high hp setup that this manifold would accel on anyway...

[Musezik]

So I got some evo 9 injectors for cheap and the clips wont fit in? Im just wondering what can I do to make them fit. Thanks.