got it delete please

[preston240sx]

got what i needed please delete

[Chrischeezer]

Regulator is on the wrong way.. its starving the injectors.
just like the factory one it goes on the return line.

I wouldn't use that china fpr. looks like one of those terrible ebay jams. eeekk get that thing off, before it blows ur motor.
looks like a fire waiting to happen, hope those lines aren't going to stay like that..

[preston240sx]

if everything is wrong then why when i put the stock fpr back on and remove the fuel rail adapter hook the lines the exact same why it starts and runs fine... with the aftermarket fpr thats why im confused gauge will read like 50 psi.......

also its not a cheap ebay one

[Chrischeezer]

that thing is a piece of junk, but thats besides the point


when you put it back to stock... it works!... because its hooked up wrong.
just think about it logically for a sec. It's "regulating pressure" in the line the fuel filter is on. now all the injectors are starving. the reason why they give you an adapter in that cheep china kit is so you can remove the factory regulator and install this in its place.

Regulators go on the return line.

43psi on a rb