RB240sxxx
03-17-2011, 02:51 PM
Part out parts
S13 SR20DET engine: Cylinders 1 and 2 had valves touching the pistons so it will need a rebuild and a headgasket. Motor had low compression. This would be good for someone that wants to rebuild a motor on the side or just do a full build. (this is complete block and head) $200
S13 SR20DET CAS- $50
S13 sr20det intake manifold w/ throttle body (no fuel rail): $50
S13 SR20det wiring harness wired for a 1993 Nissan 240sx (need injector clips, you can use stock ka24de ones) : $50
Two baby digital turbo timers one is black and the other is silver; both worked and are in decent condition $15
S15 T28 turbo; turbo is in decent shape but has some shaft play. I wouldn't run more than 14psi on it. Comes with steel braided oil lines. $200 (+shipping)
S13 Sr20det injectors I'll sell for $75.
S13 SR20det bellhousing (you can run your ka24 transmission with this) $50.
I also have a godspeed hotpipe for a s13 sr20det(no bov so you'd have to weld an adaptor on to it) $30
turbo xs rfl BOV I'll sell for $50 (no flange)
I have two SMICs both for S13 sr20det motors (one has a bov one doesnt, the one that doesnt has the air duct for the front bumper) I'd sell both of these for $30
S13 SR20DET coldpipe for the factory smic setup (plastic coldpipe) $5
All of the prices are OBO. Best way to get in contact with me is texting or calling 706-877-3451. I WILL SHIP CERTAIN ITEMS IF YOU AREN'T TOO FAR AWAY. Thanks!
http://i113.photobucket.com/albums/n203/RB240sxxx/DSC_0154.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/DSC_0150.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/DSC_0149.jpg
---------- Post added at 01:22 AM ---------- Previous post was at 01:18 AM ----------
[imp]http://i113.photobucket.com/albums/n203/RB240sxxx/IMG00054.jpg [/img]
http://i113.photobucket.com/albums/n203/RB240sxxx/IMG00051.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/IMG00044.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/172800_194782837217912_100000585922053_660860_6882 561_o.jpg
S13 SR20DET engine: Cylinders 1 and 2 had valves touching the pistons so it will need a rebuild and a headgasket. Motor had low compression. This would be good for someone that wants to rebuild a motor on the side or just do a full build. (this is complete block and head) $200
S13 SR20DET CAS- $50
S13 sr20det intake manifold w/ throttle body (no fuel rail): $50
S13 SR20det wiring harness wired for a 1993 Nissan 240sx (need injector clips, you can use stock ka24de ones) : $50
Two baby digital turbo timers one is black and the other is silver; both worked and are in decent condition $15
S15 T28 turbo; turbo is in decent shape but has some shaft play. I wouldn't run more than 14psi on it. Comes with steel braided oil lines. $200 (+shipping)
S13 Sr20det injectors I'll sell for $75.
S13 SR20det bellhousing (you can run your ka24 transmission with this) $50.
I also have a godspeed hotpipe for a s13 sr20det(no bov so you'd have to weld an adaptor on to it) $30
turbo xs rfl BOV I'll sell for $50 (no flange)
I have two SMICs both for S13 sr20det motors (one has a bov one doesnt, the one that doesnt has the air duct for the front bumper) I'd sell both of these for $30
S13 SR20DET coldpipe for the factory smic setup (plastic coldpipe) $5
All of the prices are OBO. Best way to get in contact with me is texting or calling 706-877-3451. I WILL SHIP CERTAIN ITEMS IF YOU AREN'T TOO FAR AWAY. Thanks!
http://i113.photobucket.com/albums/n203/RB240sxxx/DSC_0154.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/DSC_0150.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/DSC_0149.jpg
---------- Post added at 01:22 AM ---------- Previous post was at 01:18 AM ----------
[imp]http://i113.photobucket.com/albums/n203/RB240sxxx/IMG00054.jpg [/img]
http://i113.photobucket.com/albums/n203/RB240sxxx/IMG00051.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/IMG00044.jpg
http://i113.photobucket.com/albums/n203/RB240sxxx/172800_194782837217912_100000585922053_660860_6882 561_o.jpg