Eman240
03-03-2011, 12:15 PM
A week after I installed my walbro 225 I noticed my car was heating up and I had to turn the heater to 4 in order for it to cool down and drive fine. If I didn't have the heater on the car would be loud as hell and run pretty bad. The next morning I sprayed my injectors with carb cleaner to try to clean them out since it has worked in the past. I put them back in and my engine started to shake with white smoke/gas coming from my exhaust so I checked to see if I had any open injectors. I removed the fuel rail a few inches away from the intake unplugged the injectors and turned the ignition but didn't crank it. The number 2 injector was leaking gas pretty bad it turns out that the O ring was coming loose from the tip and was letting gas out. I replaced the O ring and the engine started fine i still need to change the oil since there is now gas in my engine and see if it runs fine again.