96 zenki grill, s13 sr20 to s14 wiring specialties harness

[NMs14.5kouki]

I have a 96 zenki grill, has one broken tab on it looking to get SOLD
http://img819.imageshack.us/img819/4885/96grill1.jpg
http://img145.imageshack.us/img145/1747/96grill2.jpg


I also have a wiring specialties s13 sr20det into a s14 chassis engine harness, it has been used a on 96 for 600 miles. I had a different setup on it (gti-r itb's, ls2 coil packs) so a handful of wires have been cut and re-solder and heat shrink. It has been converted to work on a stock sr. I can also wire up the mafs plug with either a stock s13 sr20det mafs plug or a 300zx N62 mafs plug. Even comes with the instructions! I am looking to get 260$ shipped

same as this one:Wiring Specialties S13 SR20DET Into S14 240SX Pre-Made Engine Harness (http://www.frsport.com/Wiring-Specialties-S13-SR20DET-Into-S14-240SX-Pre-Made-Engine-Harness_p_16364.html)
http://img831.imageshack.us/img831/7126/s13srtos14wireharness.jpg

[NMs14.5kouki]

1st bump.....

[revcyanide]

if that harness had been for a stock Sr id be all over it :/
but for someone with ls2 coils anda gti-r throttle bodys thats a good deal

[NMs14.5kouki]

if that harness had been for a stock Sr id be all over it :/
but for someone with ls2 coils anda gti-r throttle bodys thats a good deal

its been converted back to work with a stock sr, it had previously been wired to work with those. I just said that so people would freak out of why there is some wires solder and heat shrink. I sent you a pm about it.

[NMs14.5kouki]

last bump... anyone need a harness?

[koukimuncher]

bump for a cool legit selller! cmon peoples