OZ Designs
02-12-2011, 02:15 PM
i have a brand new, Borg warner s200sx 75-70 turbo with a t4 twinscroll exhaust housing and 4 inch inlet for sale. its 1.09ar and is similar in size to the gt30, 3076 turbos but with more top end. information taken from fullrace
The S200SX 75/70 is basically a Twinscroll T4 GT30R, but with a higher flowing compressor. The turbine wheel is a 10 blade turbine, in a T4 twinscroll turbine housing, but with T3 sized openings. WE STRONGLY RECOMMEND PORTING THE TURBINE HOUSING TO MATCH T4 SIZE OPENINGS. Recommended for use in quick spooling 380-480+ whp applications. It uses a 7-bladed Extended-Tip compressor wheel w/ 56mm inducer & 75mm exducer rated at 58lb/min. 3" inlet compressor housing, 2" outlet. Comes standard with a 1.22 A/R Twinscroll T4 turbine housing (recommended). 1.15, 1.09, 1.00 and .83 A/R Twinscroll T4 housings are also available, 1.22 is recommended. Journal Bearing and Oil Cooled only (watercooling and BB CHRA not applicable).
i bought this turbo from full-race and had a 3 inch v band housing installed. brand new, never used. will make big power on sr20det, rb20det rb25det, 2jzgte, 1jzgte, etc
$850
[email protected]
http://www.full-race.com/catalog_images/Borgwarner/bwa75-70-2.jpg
http://www.full-race.com/catalog_images/Borgwarner/bwa75-70-4.jpg
(http://www.full-race.com/catalog_images/Borgwarner/bwa75-70-4.jpg)
The S200SX 75/70 is basically a Twinscroll T4 GT30R, but with a higher flowing compressor. The turbine wheel is a 10 blade turbine, in a T4 twinscroll turbine housing, but with T3 sized openings. WE STRONGLY RECOMMEND PORTING THE TURBINE HOUSING TO MATCH T4 SIZE OPENINGS. Recommended for use in quick spooling 380-480+ whp applications. It uses a 7-bladed Extended-Tip compressor wheel w/ 56mm inducer & 75mm exducer rated at 58lb/min. 3" inlet compressor housing, 2" outlet. Comes standard with a 1.22 A/R Twinscroll T4 turbine housing (recommended). 1.15, 1.09, 1.00 and .83 A/R Twinscroll T4 housings are also available, 1.22 is recommended. Journal Bearing and Oil Cooled only (watercooling and BB CHRA not applicable).
i bought this turbo from full-race and had a 3 inch v band housing installed. brand new, never used. will make big power on sr20det, rb20det rb25det, 2jzgte, 1jzgte, etc
$850
[email protected]
http://www.full-race.com/catalog_images/Borgwarner/bwa75-70-2.jpg
http://www.full-race.com/catalog_images/Borgwarner/bwa75-70-4.jpg
(http://www.full-race.com/catalog_images/Borgwarner/bwa75-70-4.jpg)