turbooooo

[smellslikecurry]

i just bought a hybrid t3/t4 turbo and it comes with

Borgwarner hybrid T3/T04E turbocharger (P/N 51T-32)
internal wastegate
Oil inlet fitting
Cast iron downpipe elbow w/ bolts
Silicone adaptor for the compressor inlet (not shown)
bolt-on turbine heat shield (not shown)

what else would i need to put it in my car and run it as soon as possible and on a low budget

[DuffMan]

Need some more info about the turbo. I'm guessing you bought this on ebay. :(

I hope it doesnt have non-standard flanges and crappy wheel/housing sizes. :(

[96SEChick]

probably need an intercooler

[smellslikecurry]

Compressor: .7 A/R, 50mm trim
Turbine: .6 A/R, 50mm trim


STANDARD T3 FLANGE for ease of installation on any aftermarket or custom manifold. GArrett compatible oil return flange.
Housings can be rotated to fit any particular engine bay configuration.

[DuffMan]

Cool, at least it has a standarized flange. In fact I remember seeing one of those on ebay and being curious about it. Trim isnt supposed to be measured in mm, I'm not really sure what that would compare to. So I guess try it and tell us how it turns out. :D

[smellslikecurry]

sure thing, but i jst need to know what else i need...once i install everything ill tell u how it runs.

[russian]

um what else you need?

lets see for starts:

intercooler (starion, spearco, since you on a budget)
I/c piping , clamps, hoses.
turbo manifold with the flange yur turbo size.
wastegate. wastegate flange (tial, etc)
370cc injectors, bigger fuel rails.
walbro pump
boost gauge, and (optional) water temp, EGR etc
Ecu (JWT)or Apexi AFC, greedy e manage etc.
heat wrapping (you DO want it)
Blow off valve, custom piping for it too.
downpipe.
3'' exhaust is a definate plus.;)

[smellslikecurry]

thanks guys i better start saving haha.