View Full Version : starter wont crank?
rybo760
01-23-2011, 11:06 AM
hey zilvia i have a ka24de hatch ive been puttin together slowly and i finally got the fuel pump to work (missed a ground to the firewall doh)
but now the stupid starter (which is BRAND SPANKIN NEW) wont crank over.it used too but now it wont.
EDIT:: STARTER IS NOT GETTING POWER
maybe a bad ground?
And suggestions will help!
thanks zilvia
-Ryan
edguti18
01-23-2011, 11:11 AM
Check the ground that should be it. Same thing happen to me.
rybo760
01-23-2011, 01:42 PM
not the ground.i jus tightened it all the way down haha. the solinoid or w/e doesnt even click.
is there a starter relay that could be inop?
spools420a
01-23-2011, 02:45 PM
Get your multimeter out and check check check
YouTube - Starter Motor Troubleshooting Tips DIY - How to diagnose starter problems (http://www.youtube.com/watch?v=dGem9YsjCRQ)
s13droptop
01-23-2011, 05:53 PM
Not trying to be a smart ass but take it back off and have it tested cause i bought one new and had the same problem and the starter was just dead when i had it tested
edguti18
01-24-2011, 10:51 AM
Like he said get a multimeter. How old is ur battery? U Might need a new one
rbpwr
01-25-2011, 01:10 PM
i am also having the same problem. i have a optima yellow top battery that shows 12.95 once i get it started... we have to hit the starter first.my question is would road salt be messing with me on this no starting sometimes starting deal? also is there any other cars that i can use the starter from? i have a 90 s13 with a rb25det series 2, thanks in advance im a new one at this whole thing
rbpwr
01-26-2011, 03:51 PM
i had the same problem. ended up being the power wire frome my battery to starter wire was loose lol
rybo760
01-30-2011, 07:54 PM
started tested OK my power cable (positive is working and not loose) now just to find out why its not getting power haha...
lucas13dourado
01-31-2011, 12:37 PM
how about the signal wire from the ignition switch?
apply power to the starter directly from the battery to see if it will turn, that way you will know if it works. if not go to your relay and see if that is working.
start with the obvious and backtrace it.
good luck
rybo760
01-31-2011, 06:46 PM
thank you i shall do that. the ignition switch is brand new but we will see what happens cause i know new parts doesnt mean they will work haha
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.