Brake Setup Helllp!!!

[mkezzo16]

Bought a pair of JDM Project MU drilled & slotted front Rotors
was told by Mackin industries Rep they are for a 180sx
-researched into what calipers i can use..was thinking 180sx calipers & maxima pads

Issue is Rotor is wayy too big for 180/maxima caliper which is 22mm..the rotor is 28mm thick & the diameter looks about 280mm. WHAT CALIPERS CAN I USE for this..
the width of the rotor is right n between a NA z32 (26mm) and a TT Z32 (30mm)

Please Help so i can get what i need

[mkezzo16]

Oh and Btw, I know alot of you are going to say go w/ z32 setup, but car & rotor are 4 lug, keep that in mind

[sidewaysil80]

i would imagine you can get away with the ttz32. i mean, brake pads are meant to open and close as the pads get smaller, so if they start off a little closer then normal (if you were using the ttz32 rotor) i don't see that being an issue. just make sure they are fitted and bleed properly.

Oh and Btw, I know alot of you are going to say go w/ z32 setup, but car & rotor are 4 lug, keep that in mind

it shouldn't matter. the calipers are bolting to the spindles, so iirc they don't have anything to do with 4/5 lug. wait i'm positive they don't i've seen 4 luggers rocking z32 brakes.

[mkezzo16]

Gotchaa but i meant as far as doing the complete z32 setup w/ calipers/rotors..on threads where people asked about 180sx setup..most people just say go z32..neway thx for the input

[badicalradical]

U have the Project MU PN#'s?

[mkezzo16]

I dont Im at work right now..you can check them out here SCR Pure Plus SD624 (http://www.project-mu.co.jp/e/product/sd624.html)
-they also have only the rears for s13 @ enjuku but..im startin to think maybe i recvd the wrong ones..none of the nissan applications for that rotor state 28mm thickness on their website..

[murda-c]

Q45 brakes are 280x28mm

[mkezzo16]

i didnt even think to check q45 dimensions..thanx .

[WISH ONE]

My silvia brakes were some odd sizes also.

[mkezzo16]

im gonna try some q45 calipers..hopefully i can get my hands on some this week

[mkezzo16]

q45 calipers worked..but just realized 4 lug bolt pattern is off on rotors ..they need to be redrilled