Ka24de engine parts/injectors/wastegate

[91white_ka]

Ok so I decided to sell some of the parts I'm now using at the moment.

First is a set of Arias pistons, ka24de, 8.8:1 comp, 89.5mm (.020 over) New condition. $450
http://i123.photobucket.com/albums/o299/mommyshome/P1140003.jpg

Wiseco pistons ka24de, 10.5:1 comp, 90mm bore, New condition. $300
http://i123.photobucket.com/albums/o299/mommyshome/P1140001.jpg

BC stage 2 cams ka24de, used but good condition. $300
http://i123.photobucket.com/albums/o299/mommyshome/P1140005.jpg

BC titanium springs and retainers ka24de, new condition. $300
http://i123.photobucket.com/albums/o299/mommyshome/P1140004.jpg

Lucas 1200cc topfeed low imp injectors, used but good condition. $200
http://i123.photobucket.com/albums/o299/mommyshome/P1140006.jpg

Precision 650cc topfeed low imp injectors, used but good condition. $150
http://i123.photobucket.com/albums/o299/mommyshome/P1140009.jpg

JGS 40mm wastegate, comes with instructions, valve seat and bigger spring, used but good condition. $200
http://i123.photobucket.com/albums/o299/mommyshome/P1140007.jpg

If you have any questions feel free to PM me, thanks.

[91white_ka]

Bump number one

[BenArtM80]

if only those wiseco pistons were the low compression version

[turbonola]

whats wrong with the arias? thats what i'm about to be running. anyways, the jgs 40mm bolts into a 38mm waste spot right?

[Ryan.maccie]

price on weisco pistons shipped to Richmond British Columbia V7a3s4

[91white_ka]

whats wrong with the arias? thats what i'm about to be running. anyways, the jgs 40mm bolts into a 38mm waste spot right?


Nothing wrong with the arias pistons, I simply have too many sets right now. As for the wastegate it's a 2 bolt flange, not sure if it's your standard 2 bolt tial. I have an extra manifold I'll check on it today.