View Full Version : Boost Gauge: T-fitting location
millertm
01-07-2011, 08:23 PM
Planning on installing my boost gauge tomorrow and I think looking at the forums and internet has confused me. I originally thought the t-fitting is suppose to be installed on the hose coming off the throttle body (right side closest to engine). Is this right? If not where is your t-fitting installed.
If you have a picture that would be great.
I appreciate the validation or correction!
D.Adams
01-07-2011, 08:28 PM
i hope this helps
I have mine T'd off the left vac rite before the FPR
http://farm6.static.flickr.com/5208/5334967478_500e4e1329_z.jpg
millertm
01-09-2011, 06:29 PM
Thanks for the response. Of course the line everyone taps into is already used for the boost controller. I'm a little cautious to tap into this line again. Any suggestions?
S14DB
01-09-2011, 06:40 PM
You can use the BOV line instead of the FPR. Anything that is connected to the manifold(vacuum).
The boost control/WG line should be before the TB, charge pipe side.
Thanks for the response. Of course the line everyone taps into is already used for the boost controller. I'm a little cautious to tap into this line again. Any suggestions?
I'm confused, what line does everyone tap into for their boost controller?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.