s14 sr20det not sparking, but power is there

[spinca57]

can anyone help me confirm that this is the correct pinout for a jspec s14 sr20det?

http://www.emergent.com.au/200sx/s14-ecu.html

i have the motor installed and we are having a little trouble starting the car. ignitor and CAS have been checked already.

if you have any suggestions let me know

thanks

[kandyflip445]

It looks like it. Pin#30 is for BOOST among other things and no USDM 240 came with a turbo so...

[spinca57]

the reason i was asking was because I ran into this.

http://myweb.tiscali.co.uk/kuddy/200sx/_images/s14aecupinouts.gif

[kandyflip445]

So you used the second one instead of the first one?

[Fibercus]

All you basicallyt doing when wiring it up is providing power. You shouldnt have to touch the wires going to the ecu. Unplug the CAS ans Chip harness's and troubleshoot for power and continuity as shown step by step in the FSM on this site.

I did the wiring for my s14 sr. Did you read the troubleshooting section in the FSM? you can find everything out with a voltmeter

[Fibercus]

I used the following diagrams - s14 sr into s14 zenki

SR
http://www.slapmahfro.net/car/F4.php

KA
http://www.slapmahfro.net/car/M63.php

[spinca57]

no we followed the first one and i saw the second one wanted to ask the board to find out which one people used.