S14 sr wont start

[cubbies1031]

have an s14 sr i swapped into my 1995 240. it was a direct plug and play swap but when im lookin at the harness i noticed i didnt see any connectors to the fuse box. is it possible they bypassed this when wiring up the last car it was in? maybe i am just not seeing the connectors and this is why it wont start.

[Sileighty_85]

Sounds like the harness was wired up for a 5 Speed and your chassis is an Automatic huh?

You should probably use your KA lower harness though

[cubbies1031]

yea im doing the 5 speed swap on it...it was an auto but the sr and 5 speed are now in it how can i get this thing started

[Sileighty_85]

if you dont wanna do the wiring

Wiring Specialties S14 240sx Transmission Harness for SR20DET swap (http://www.wiringspecialties.com/wss1424trhaf.html)

[cubbies1031]

So since the car i pulled the engine and transmission from was a 5 speed and mine is an auto i need this? i has already had 6 hours of full wiring done and is supposed to be plug and play. is this only because mine is an auto?

[Sileighty_85]

Most ppl rewire the auto harness for the 5 speed.

The link i posted will be 100% drop in, with no headache

Its pretty cheap was well

[cubbies1031]

so will the ka harness no work. will i have to get this custom lower sr harness?