silvia_s14
12-17-2010, 08:26 PM
Thanks for all your guyzez help :ughug: . i looked at the exhaust had a couple leaks, borrowed my brothers cat, fixed a couple egr hoses that were ripped n craked n passed smog. smog guy fixed my timing n now im getting a lot of clutch slipping. what's next. :duh: thanks again .
--------------------------------------------------------------------------
my car is a 95 240sx passed everything except a NO(PBM) TEST
15MPH: MAX- 493, AVE-170, MEAS 1639<--- FAIL
25MPH: MAX- 516, AVE-158, MEAS-0657<--- FAIL
the guy at the smog place said it could be a exhaust leak or something to do with my EGR system.
before the test i put everything stock back on and made sure they were tight. he tested my EGR valve n said thats funny it should hold pressure mine isn't. it builds pressure for a couple seconds n drops to nothing. i'm not sure what to do.
Thought i should add this too. my check engine light is on after i just completed my auto->5speed swap. i used my stock auto harness n wired all the transmission connections up. the wires for the auto transmission are still hanging there cut n taped up not sure what to do with them. uummm, i'm using a 5speed ecu. I DID DRILL THE HOLE FOR THE CRANK ANGLE SENSOR PRETTY CLOSE TO WHERE IT WAS ON MY BROS 95 5SPEED 240. please help me my tags expire the 18th :sadwavey: thanks zilvians
--------------------------------------------------------------------------
my car is a 95 240sx passed everything except a NO(PBM) TEST
15MPH: MAX- 493, AVE-170, MEAS 1639<--- FAIL
25MPH: MAX- 516, AVE-158, MEAS-0657<--- FAIL
the guy at the smog place said it could be a exhaust leak or something to do with my EGR system.
before the test i put everything stock back on and made sure they were tight. he tested my EGR valve n said thats funny it should hold pressure mine isn't. it builds pressure for a couple seconds n drops to nothing. i'm not sure what to do.
Thought i should add this too. my check engine light is on after i just completed my auto->5speed swap. i used my stock auto harness n wired all the transmission connections up. the wires for the auto transmission are still hanging there cut n taped up not sure what to do with them. uummm, i'm using a 5speed ecu. I DID DRILL THE HOLE FOR THE CRANK ANGLE SENSOR PRETTY CLOSE TO WHERE IT WAS ON MY BROS 95 5SPEED 240. please help me my tags expire the 18th :sadwavey: thanks zilvians