SRpetey
12-12-2010, 06:51 PM
I need help figuering out why my trunk release wont open. I have a viper alarm that has a trunk release signal and i have a maxima trunk release selonoid. The alarm sends out only 200mV and states that for higher volts use a relay. So i wire my relay in but the 200mV wont ativate the relay coil. If i use a 12v source instead of the 200mV that the alarm sends the relay works and so does the trunk release.
Is there something else that i need to add or is there a diffrent relay that gets trigger at 200mV. I tryed a bosch relay and a radio shack relay both dont get trigger with the 200mV
Is there something else that i need to add or is there a diffrent relay that gets trigger at 200mV. I tryed a bosch relay and a radio shack relay both dont get trigger with the 200mV