View Full Version : Mid-engine 240
AutoDestruct
09-02-2003, 05:21 AM
Has anyone heard or has seen of a mid-engined 240? I ask because my 240 is now bent and A tube frame rear, I think would be one of the ways to save it. I bought this car for a 1000 dollars and I would like to keep it. It has been through "the war" with me. The Impact is not incredible major. Just enough to bend the Ace of my car. As is obvious through the warping of the spare tire well and the lack of seal on the hatch area. The back suspension and tire could almost pass off as being in a normal position but I know better than to think it is. Seeing that there are other succesfull Mid engined swapped cars, I was wondering if this is at all possible. And I understand that with $ you can do anything but I am saying realistically, as In sub 5000$$. Eng choices could range from VG,VQ to Fwd SR20, or even Altima KA's. Is this even a feasible thought? Any info is welcome even flames. This is a chance to experiment, please help.:(
Help a 91 get its life back on track
sykikchimp
09-02-2003, 07:52 AM
You could probably do it if you tube framed the rear end , and used a FWD motor. Do some modifications to the shifter cables, add a firewall, and some sort of engine cover like in the mid-engine hatched Clio'.. Maybe you could even use an MR2 Turbo engine. THAT would be unique. :)
All speculation though.
andrave
09-02-2003, 09:02 AM
ok what you should do is turn it into the fastest drag car ever. I've had this idea floating around for a while so I'll go ahead and post it up and you guys can tell me why it won't work.
OK. listening?
first off you take a skyline GTR drivetrain and install it in the front of your car. This isn't gonna be easy so I hope you are good at fabrication (if you can handle a mid engine'd 240 this will be easy for you though). Now you think, yes this is good, I have a front engined, AWD car. What is the point?
ok, the point is this. Go ahead and buy a second skyline GTR motor/tranny and mount it where the rear seat is, sandwiched between the first tranny and the diff. Run a short driveshaft from the RWD output of the first transmission INTO the FWD output of the rear engine/transmission, and run the RWD output of the last tranny back into your rear diff.
Do a custom 4 link setup in the back.
Buy fender flares for all four sides, run 10" wheels all around, with some real big drag radials. Build each engine identically and use a sequential shift conversion (so you could mechanically link transmission together for faster shifting). An air shifter would help.
Anyway that would mean, since there are drag skylines with 1000 hp, you could probably put down about 2000 HP....
I think that would be fast...
and 2 way limited slips front and rear...
Zemus
09-02-2003, 09:19 AM
Ive seen that setup with a rabit truck with a 4 cly in front and a 500ci v8 in the back, i saw it in real life, it was nutz
Rennen
09-02-2003, 09:44 AM
Here's some inspiration:
Mid4 Concept car thread (http://www.zilvia.net/f/showthread.php?s=&threadid=30146)
A concept car with mid mounted VG30DETT and Skyline AWD system
-Matt
I already checked with a place and they said they would drop in the RB26DETT and AWD for 25k
kazuo
09-02-2003, 05:12 PM
I have an issue of HYPER REV that has a midrear S-chassis (was either 14 or 15, i forget)... some JDM tuner did it :P
I'll scan & post later if enough people want to see it. ;p
SilviaDriver
09-02-2003, 05:20 PM
yea it can be done. ive seen a mid engine integra which was pretty awsome. as for sub 5gz? im unsure about that. sounds like a fun idea
JDM K's
09-02-2003, 06:46 PM
Here you go, I wish I could find more pic of this car.
http://www.nissansilvia.co.nz/TAS2003/S14/s14_day1_t16.jpg
http://www.nissansilvia.co.nz/TAS2003/S14/s14_day1_t17.jpg
http://www.nissansilvia.co.nz/TAS2003/S14/s14_day2_t04.jpg
andrave
09-02-2003, 07:16 PM
that is an RWD SR20 in the front, right? so whats in the back? AWD/FWD sr20?
SilviaDriver
09-02-2003, 07:21 PM
wild
AutoDestruct
09-02-2003, 07:44 PM
wow. I'm glad I hit a nerve. That gives me the guts to move forward. What would I use for ?half-shafts? / CV joints?rods?:p
Driftin_240sx
09-02-2003, 07:51 PM
if your car is allready tube frame and u are going this all out, get a hold of a 3sgte (mr2) and a ct20b ..... that is allready mid engine and just see how much of the rear cut u could use... now that would be bad A$$ ....
david
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.