PDA

View Full Version : Someone help me with my idle issue!!!


s13_rb25
11-27-2010, 12:19 AM
Ok so i have an idle issue, ive tried tons of stuff, new intake manifold gasket with permatex, maf, tps, but it will not idle! i can rev it and drive it, but it wont idle. i did a little pul today, and the intercooler piping right off the turbo came off, and it stayed on, but itd rev, then stop, rev then stop. over and over. i sprayed starter fluid on the boots for the injectors, and it revs up. in the pic is what im talking about, with the fuel rail on and tightened down correctly it should not do that correct?. can anyone give me ANY solutions please!! or where i can get these rubber pieces at????

http://i156.photobucket.com/albums/t35/dc4life112592/S1320Polish20Intake20Manifold202_jpg_1704200912153 5.jpg

<a href="Login to a private Photobucket.com album (http://s156.photobucket.com/albums/t35/dc4life112592/?action=view&amp;current=S1320Polish20Intake20Manifold 202_jpg_17042009121535.jpg)" target="_blank"><img src="http://i156.photobucket.com/albums/t35/dc4life112592/S1320Polish20Intake20Manifold202_jpg_1704200912153 5.jpg" border="0" alt="Photobucket"></a>

http://i156.photobucket.com/albums/t35/dc4life112592/S1320Polish20Intake20Manifold202_jpg_1704200912153 5.jpg

PM me or even text me with solutions asap!! thanks! 4074094850

steve shadows
11-27-2010, 12:49 AM
You should invest in a good quality vacuum leak tester if you want to be sure you don't have any leaks at all. It's a type of leak tester that works like a smoke machine and fills the entire system with that smoke crap that smoke machines make...then you can find any leak...even little tiny ones you might have never known about

Like this one

Leak tester example (http://www.asedeals.com/leak_detector_2.html)

s13_rb25
11-27-2010, 12:54 AM
OMG! Thats expensive!!! id rather buy a new swap than spend that much to find one vacuum leak! haha.

JDMRIDDAZ
11-27-2010, 05:53 AM
junk yard u can find them
and if u dun wanna leak then use rtv