Tons of SR20 parts - 500hp setup - Greddy, Wiesco, HKS, Ferrea, JWT

[hennajapagaijin]

I am selling my setup that I have pieced together over the past few years. Half of the stuff was never used. All prices are OBO and include shipping unless otherwise stated (mainly for the heavier pieces). I also have a wiring harness and Enthalpy ROM tuned ecu available but not listed. Please email any questions or offers to [email protected]

SR20DET block re-sleeved and bored to 88mm ($800+shipping) (never reassembled since it was sleeved) SOLD

SR20DET Head ported/polished w/ 1mm Over-Sized Ferrea intake/exhaust Valves, Ferrea Dual Valve Springs, Ferrea Titanium retainers, JWT bronze intake/exhaust valve guides, new valve steam seals ($1200+shipping) (never used) SOLD

2ea SR20DET 5-speed Transmissions ($200+Shipping) and 1ea 300zx 5-speed Transmission ($250+shipping) (I planned on using the Mazworx adapter kit w/ this)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030886.jpg

Hybrid Dynamics Turbo Kit (Garrett GT3076R .63a/r) Top-mount Equal length manifold, Tial 44mm WG, all oil/coolant lines for SR, Mani and hot side of turbo are Jet Hot coated, downpipe and exhaust are still on the car ($2,000+shipping)(less than 1,000 miles on this kit)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030873.jpg
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030876.jpg

Genuine Greddy Intake Mani ($500)/JGY Top mount Fuel Rail($85)/ MSD 72# injectors (set of 4 $200) (Less than 1,000 Miles on all of these)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030878.jpg

Splitfire Ignition System ($325)(ignition amplifier not pictured but included, Less than 1,000 miles)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030882.jpg

Genuine GReddy Oil Pan ($225)(Less than 1,000 Miles)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030890.jpg


The following items are brand new and never installed or used
Eagle Rods ($270) SOLD

Custom 88mm Wiseco Pistons with Swain Gold Coat on Dome and PC-9 on Skirt ($500)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030830.jpg

JWT C1 Cams ($500) SOLD

HKS Cam Gears ($300) SOLD

Tomei Solid Pivot Lifters ($225) SOLD

Cometic HG (Works with 88mm Pistons) $85
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030817.jpg

A’pexi 87mm/1.1mm (works with 88mm Pistons)$165
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030814.jpg

GReddy Rocker Arm Stoppers ($50)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030843.jpg

Nismo Engine and tranny mounts ($215) SOLD


Spec Lightened Flywheel ($240)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030863.jpg

RPS Max Street Clutch Rated at 475ft/lbs ($370) SOLD

ARP Head and Main Studs ($215) can sell seperate
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030854.jpg

New OEM Rocker Arms / Timing Chain Tensioner / Throw Out bearing
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030821.jpg

New OEM misc gaskets, seals, etc
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030835.jpg

Calico CT-1 coated race bearings (have new OEM as well)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030845.jpg

OEW Water Pump ($35)
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030862.jpg

Timing Chain
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030859.jpg

Timing cover oil pump ($210) SOLD


These four boxes contain misc SR parts and accessories (Power steering pump, alternator, starter , fan etc) this in addition to the parts I have already listed, nothing in these boxes are pictured or listed above
http://i20.photobucket.com/albums/b201/hennajapagaijin/P1030892.jpg

[sr20time]

dang nice parts... Timing Chain how much?

[dr.klawn]

crank shipped to 36695?

[NMs14.5kouki]

do you have a stock blacktop sr ecu? whats the tune on the Enthalpy ecu? pm me prices on both too.

[jarend]

the splitfires are 380 brand new.. pm me if you are able to go any lower..

[DJPimpFlex]

Waterpump for S13 or S14 sr?

[nxt774]

such a large collection of parts, registered since 2005, this is your first post, and listed as located in japan ..... hmmm
either scam or the biggest lurker known to zilvia

[P-Funk alot]

just put it together and keep it man alot of time and money and your more then half way to beasting

[hennajapagaijin]

such a large collection of parts, registered since 2005, this is your first post, and listed as located in japan ..... hmmm
either scam or the biggest lurker known to zilvia

I was stationed in Japan when I was in the military. I'm on FA, Nico, LS1Tech, 502Streetscene, ARImport, MDstreetscene, ebay and more under the same screen name (and actually posted a few times). You can see this car/setup and my current cars on some of those sites. I don't post much but read and 'search' a lot. I have seen people get flamed for not searching but rarely for not posting.

just put it together and keep it man alot of time and money and your more then half way to beasting

I hear ya! I am no longer able to drive a standard transmission and I don't think this setup as an auto would be much fun. I just bought an LS6 to put in my Chevette but may put it in S14 shell I have instead. I just know I need to get rid of this stuff.

[JohnnyTyVan180sx]

spec flywheel interested..

[hennajapagaijin]

Bump.......

[thenucci24]

how much for sr20det starter shipped to 46815 and what is the condition?

[chibich]

stock sr20 cams? shipped to 23233

[schrapnel85]

great prices! check out prepped blocks or prepped heads on mazworx and compare! those items would be a steal! and of course this comes up at xmas! GLWS

[leekim240]

hey are you willing to part with the wastgate. Let me know asap

[titangts]

PM sent!! check it dude! thanks

[v8kllr240sx]

Head studs shipped to 33870 pm me

[zxc4]

PM me if you will part with the "oil/coolant lines" from the turbo kit

[JonGu]

Still have the SR20 starter? What are you looking to get for it shipped to 77055 assuming it's in good condition? Also how much for the engine harness and what condition is that in.

[gotta240]

How much for the sr20 ps pump? Or just that little bracket bolted to it behind the pulley?

[sr20time]

\how much for oe water pump+timing chain shipped? also might be wanting the rocker arm stoppers.

[RHDskyline]

sr ps pump? price?


PM ME

[Xclusive_racer]

PM the individual prices on the pelican boxes

[didderson]

what diameter injector openings is that fuel rail?

[JDGrimReaper666]

Will the ras fit a s14 sr20? If so, pm me

[wangan_cruiser]

main studs are used or bnib just open to check?

[speedgod^s13]

Wow, a thread from 2 thousand fucking 10. :bash:

[1slicktwo4oh]

Price on rocker arms ship to 90605

[Speedy Claxton]

S13 ps pump and brackets shipped to 77657.

[wangan_cruiser]

Wow, a thread from 2 thousand fucking 10. :bash:

hey stupid someone bumped this thread before me. learn to read douche paradouche

[speedgod^s13]

hey stupid someone bumped this thread before me. learn to read douche paradouche

You should learn how to read. If you had actually taken the time to go through the thread, you would have noticed that dates. Just because someone else bumps a 2 year old thread, that makes it OK for you to follow that lead? That makes you look like an even bigger dumbass. :stupid: