PDA

View Full Version : CA 4/5 Lug Hub, Dual Pattern, TC Sportline

blackrms13
11-13-2010, 07:14 PM
SOLD

I have 2 TC Sportsline Dual 4 and 5 lug hubs for the S13 REAR ONLY
I guess it should work for S14 and NA Z32 too

I figure someone would benefit from these much more than I do. I only have 5 lug wheels now. You can swap between 4 and 5 lug pattern just by reinstalling the studs, takes like 20mins MAX....

so put on ur 5 lug baller wheels for DD status, then cheap 4 lug wheels for the drifting time

Note: They are the hubs only, does not come with bearing!

If you want, I can include the OEM 4 lug hub with the bearing...
all you have to do is find someone to separate the bearing and press it into these hubs.
or you can buy new rear bearing and press into them

Asking: $100 obo...
I know...ichibas goes for over $200....and those are 5 lug ONLY

they come with 5 studs that u can screw in
so basically u just unscrew the studs to switch between the lug patterns...

http://memimage.cardomain.com/ride_images/2/4847/1961/24615980178_large.jpg

http://memimage.cardomain.com/ride_images/2/4847/1961/24615980180_large.jpg

http://memimage.cardomain.com/ride_images/2/4847/1961/24615980179_large.jpg
blackrms13
11-15-2010, 07:17 PM
http://fotofon.cathexes.net/archives/bump02.jpg
lainardisboss
11-15-2010, 07:26 PM
are these things reliable?
blackrms13
11-15-2010, 07:28 PM
are these things reliable?
front pair was on my car for over a year, no problem
blackrms13
11-20-2010, 02:42 PM
last bump?
ACMERACEING1
11-20-2010, 05:25 PM
Whats ur numberr
blackrms13
11-20-2010, 09:19 PM
Whats ur numberr
sent you a pm
killer240
11-20-2010, 09:40 PM
just curious
is there longer studs available for these?

you can probably just get some bolts for these.
blackrms13
11-20-2010, 09:44 PM
just curious
is there longer studs available for these?

you can probably just get some bolts for these.
you can probably source them somewhere?

I just have what's shown in the pic
chiboy002
11-21-2010, 01:02 AM
how often did you change lugs? i'd assume changing it a lot will put a lot of wear on the spline teeth, causing them to weaken.
Mikey McFly
11-21-2010, 02:02 AM
Is there something to add to the side opposite of the wheel to keep it in place? For some reason I feel as if the stud would want to undo itself under certain conditions like high vibration or something of the sort.
blackrms13
11-21-2010, 04:55 AM
how often did you change lugs? i'd assume changing it a lot will put a lot of wear on the spline teeth, causing them to weaken.

I never used the rear pair, they are brand new.

Front I tend to take them off at least once a month for different reasons...

Is there something to add to the side opposite of the wheel to keep it in place? For some reason I feel as if the stud would want to undo itself under certain conditions like high vibration or something of the sort.

Keep the studs in place?
They kinda just screw in, in the opposite direction of the lugs.
So it stays in place.

I have the front pair on my car for a long time without any issues