September Chicago 240SX Meet

[KiDyNomiTe]

Well to get one last meet in this year (or at least one last major meet), lets start talking about it.

I had in mind Sunday September 21st, at Miami Woods (the old meeting place).

As the time comes we can arrange a BBQ.

Hope you can all make it to this meet.

[nismofeind]

yea thats me i work on sundays and i have been wanting to go for a while.

what about near woodfield mall

[KiDyNomiTe]

I dislike meets in parking lots of malls, unless you mean somewhere in Busse Woods. That would be a nice place we would have to get I think 40 bucks to reserve the place, I know some spots have benches and shelters which would be good if bad weather occured.

Well if you guys want to do busse woods, then could someone from the are go there look for a nice spot and find out a little more about reservations, I'll pay whoever most of the money back. If nobody can get there, I'll head over there when I pick up my hatch this week.

I guess saturday would work, see what kind of response we get on a saturday since we never had one on a saturday. Saturday the 20th?

Hopefully the weather is decent, its starting to get real hot during the days now (but I guess I have been out of state for a while).

[gilwankel]

any of you guys goin to battle of the imports at route 66?

[gmgs14]

I'm down for whenever late in Sept. I have missed the last few and I need to get back out!

[KiDyNomiTe]

gilwankel - I will be going to one day on Battle of the Imports.

gmgs14 - I dont even know if I have ever seen you at a meet, you always respond but never make it :(, hope you can make it out to this one.

I guess everything will be finalized once I get over to Busse Woods and pick a spot and put some money down for it. Prolly wedenesday.

And James I am free all week to get the dremel.

[1fasts13]

hey i will actually have a 240 to bring out to this one :D

[Bill Roberts]

SEPT 21...Hummm...I might be able to do this one..can't drive it..no enough hrs (frigging 60 hr drive round trip)

How will the temps be..like 45 degree nights?

We rarely see below 50 here on the coolest days ever..so I need to prepare. It is shorts and slaps year around here....

I was in Chicago on May 2nd 91 and froze my azz off.


Logistics seem close to right for that date..keep me posted please..PM does work again..not full.

[sideway]

Hey i was at the last meet. But I doubt anyone remembers me Black S14 (cuz I had to leave early for work and didn't get to really meet everyone) But I personally don't really care where ya'' are having this, all I know is I'll be there!:)

[X1nom3D]

hmm, interesting... haven't been on here for a while, and i missed all the fun meets, darn! *sigh* maybe this one? or maybe not? we'll see, i hope i don't miss another one.

[gmgs14]

Originally posted by KiDyNomiTe
gilwankel - I will be going to one day on Battle of the Imports.

gmgs14 - I dont even know if I have ever seen you at a meet, you always respond but never make it :(, hope you can make it out to this one.

I guess everything will be finalized once I get over to Busse Woods and pick a spot and put some money down for it. Prolly wedenesday.

And James I am free all week to get the dremel.

I went to one last fall and froze my *** off. I don't know if you remeber but it was the one where we went to portillos after. Oh well I'll still try to make this one.

[DuffMan]

The problem with meeting at a resturant is that then we go outside to look at cars and mill arround in the late afternoon or evening. It could be kind of cold.

In my opinion the format of meeting in the afternoon and going to a resturant for dinner works best. That way we can go in to warm up if its cold. Just need to post it here so the people are aware about it and stick arround (if they are interested in eating). Basicly like McD's at the meet by the lake, but with more people sticking arround. I think its going to be hard to get too many people for a lunch because people like to show up at their own convience and sleep in. Plus there are people driving a long ways to get here.

Just my opinion.

PS bill that would be awesome if you came up. Meeting people from other areas is always cool.

[KiDyNomiTe]

gmgs14 - I guess my memory is bad, which person were you? I was there, just dont remember everyone.

On the whole food thing, I would have to agree with Duff, first chat about our cars, put names and cars together, and get some pics. That can be like 12-2, then head over to some place to eat together and talk. Somewhere with a big parkinglot and big tables.

If we do it that way then no need to reserve Busse Woods, we could just raid one of the spots there (shouldnt be full that time of the year anyway), then head over to a resteraunt somewhere in schaumburg.

Anyone still have a map of Busse Woods? Then we could get a map of which spot to go to.

Once the location gets finalized (where to eat can be decided at the meet), and we get a map, I'll update the site, and get Art to send an e-mail to everyone.

Bill- Hope you can make it out, don't worry about not showing up in a 240, thats my style :D.

[gmgs14]

I was in the red zenki, i came with heather in the red kouki. We were both stock then, MI plates. Ring a bell?

[KiDyNomiTe]

Theres a Chilis there:confused: , have i been away from that area for that long. Anyways ya that sounds good.

About the list I guess I'll grab it and start going through these threads and PMs I've gotten and add up these names.

Bill imma put you on the list do you want me to take you off after the meet? Don't want to keep bothering you about meets next year.

So Saturday, September 21 @ Miami Woods 12PM-2PM 2 to whatever eat at resteraunt, possible cruise or something afterwords (discuss at lunch).

I'll post on other forums, anything I miss post it.

gmgs14 - ya now I remember, whatever happened to heather, she never posts anymore

EDIT: I lost the list, anyone have it saved?

[Bill Roberts]

Kid , heres the deal I wanna attend and swap knowledge and stories, I know you guys are fning cool.

Keep me on the list..when it gets close..I will make arrangements to make it there if someone wants to pick me up..that is even more cool.

I just wanna jam, share some music and car talk...and help if I can with some mod factors.

I like your vibes and I NEED to get up there for plenty of reasons..
Getting some Chicago food is always right on. Keep me away from tequila...


Beer and boubon is ok...and Grand Marnier.

Like to also ride out with some peeps wanting to cruise.

I promise to bring some vid of some of my ride arounds. You guys will trip to what goes down around here...outragous.

Nest post a pic..I edited and forgot (duh)



OK Cool.

[Bill Roberts]

A quick shoot in traffic..

[Bill Roberts]

Nice RB here it bites...

I was not embarassed by it with my car...but this was a nice ride..


Well RB is the key. KA can push to it..not reach it../.but good show.


It is tough to hang with. This is the drivable 240 that totally dominates...it is...

Super engine to have and this is the one to get one day...very nice..

[gmgs14]

Originally posted by KiDyNomiTe
So Saturday, September 21 @ Miami Woods 12PM-2PM 2 to whatever eat at resteraunt, possible cruise or something afterwords (discuss at lunch).

gmgs14 - ya now I remember, whatever happened to heather, she never posts anymore

Kid, the 21st would be sunday. are we shooting for sat. or sun.? I'm working on getting a couple people out from MI and I'll pm Heather to see what she's up to.

[KiDyNomiTe]

well either day is fine with me, I acutally mean saturday the 20th, is anyone out there not able to make it out on saturday? Plus I put in most forums the 20th

[JDM180SX]

Hey guys and gals! Sorry I couldn't make it to the last meet but I'm wanting to get together and this time I have a added bonus....

My little sis has gotten a 240! :D Yay, but it's cleaner than mine!:mad: hee hee. I'm gonna drag her to the meet too.

Well, keep us all updated on the day and time!

-Eddy & now, Tania ('lil sis)

[pearlwhiteS14]

Either day I am in!!!
James- I found a guy in Indy that has a ka manual trans and he wants to give it to me for $50.00 this includes the clutch. what else will I need inorder to take out that terrible auto trans? THe ecu, cable, pedal........? I need your help. I may have my rims and tires on by this new meet?

I hope this meet will be huge!!
The guy in indy did a RB swap and I am seeing if he can come up for this meet?

Talk to you guys later
Kevin

[JDM180SX]

Originally posted by James
JDM180sx- Tania has an automatic I'm guessing? Pretty cool the family has another 240- guess she knows you'll be doing all the work on it- free labor is always nice:D

Surprise James...It's stick! She's learning little by little...but yeah, I guess she's gettin a deal w/free labor. I'll just make her buy the food. But, she wants a lip for it...so, if you happen to have one, let me know what your asking for it.

-Eddy

[KiDyNomiTe]

Which bomex skirts and rear do you got?
Might be interested.

[KiDyNomiTe]

I kinda had a feeling about that (the:doh: )

[DuffMan]

On the subject of the Chicago area parts trade...

Hey james you have an extra pedal and m/c from your clip right. Pearlwhite needs that + a clutch line.

Not sure if s13 and s14 pedals and m/c's will bolt up in place of each other but its a thought. I dont think the JDM mc is exactly the same as even the USDM s13 MC but i heard somewhere you could use it. It might be cheaper to get hardline bent by a shop than finding it in a junk yard anyways in which case it wouldnt matter.

Also, I need the soft line that goes to the slave cylinder. It looks like the previous owner of my 90 cut it to get the tranny off. WTF?!?! Heh so if you have one or see one in a junk yard I'd buy it.

[Crab Spirits]

Sup guys, it's been awhile..

DUFFMAN! Where the hell are you? We (guys from www.ClubFR.net) went drifting last night. You should come check it out since I haven't seen you on the board. BTW, Kid, the guys wanted me to give you a call last night but it was like 1am when we took a coffee break in the "tea party". I didn't know if you were sleeping or downloading your hentai or whatnot. :cool:

[DuffMan]

I registered on the board, I'll start checking and posting there more often.

I read you got your coilovers how are they.

[KiDyNomiTe]

James - The skirts I was thinking of arent even made by Bomex, I am thinking of the ones on PDMs site. And seeing as how their lip is a bomex rip-off, i thought the skirts were too. The bomex ones seem to flashy for me, just want something to go with the lip (not overshine the lip).

Crab Spirits - Lets see at 1 I think I was done downloa... I mean watching tv:p . I'm not a late night tea drinker but I guess its time to start :D . I havent started school yet so I am still up all night anyways.

[JDM180SX]

James - I wonder who it was you got them from??? :rolleyes: Hee hee. Well, her car was originally red from what I can tell but it was repainted maroonish like the S13 coupes came in. So, I guess a redish lip would be cool.

And for all of you out there....I'm still lookin for a 91-94 stock front bumper w/lip (not the 89-90 lip). I don't know if those who did the Silvia Group Buy have gotten them yet but if anyone has a Front Bumper I'm interested...Pref Grey/Charcoal but any color is fine. Just PM me a price.

-Eddy

[X1nom3D]

hey... you wouldn't mind a slightly riced up 240 showin up at the meet, would ya?? so maybe you'll ask, "if you know you're riced, then why do it?" well trust me, I have my reasons and one of them is to NOT have a mistaken identity problem, which i know wouldn't happen now. i mean, you know i check out the galleries and stuff, and i read people's comments on them, and i noticed a lot of people don't like some things that i do, and i guess that might discourage me a lil from going to the meets. maybe we can all get along someday???

[KiDyNomiTe]

X1nom3D - Whoa your car looks umm interesting, not my style but I can appreciate someone who does the paint themselves, especially something so indepth. Sucks what happened with the Do-Luck front end, looked real nice then.

Anyways come to the meet, the more the merrier.

[gmgs14]

Just to make things positive when I go to work tonight to get time off, we are doing this meet on saturday the 20th correct?

[KiDyNomiTe]

yup yup

[Bill Roberts]

X1nom3D

Just a little friendly advice...Who cares if you riced out your car some. I riced out a 79 Cutlass when it was new not knowing that it looked kinda wierd...but it was what I wanted and I got many trophies for "originallity and style" with it. You don't need to be like everyone else. Just because a lot of folks think rice is kinda posey and kiddish does not mean that for everyone. IF you like what tyou did then...keep it..don't worry about what others say...if you "personally" have a change of heart...change it...but because someone or even a lot of folks might not like it does not matter. It is what you like that counts. Personally, I like a bone stock looking car that is fast enough to give vettes a hard time and especially with a quiet exhaust. We call them "Sleepers"

When I did my cutlass, it was not only fairly quick and I had some fake badges on it too (1979) but everyone asked if it was a turbo...because I had the turbo 3.8 insignia on it...when it was a 4.3V8 and not a 3.8V6

I even told folks that I ran it on the track some...(well I did 2 times) by todays standards, that car was kinda slow...0-60 in 8 and 1/4 in 17 but I use to drive it like it was fast...

Be yourself...if anyone disses you because it is rice...have them take a peek in the mirror for a glance.

Do your own thing...even if it is wrong.

[1fasts13]

rice this rice that......mine will win the rice award :fawk:

nobody is gonna beat my 3 tone exterior, rust/dent on both doors, bigger tires in the front than rear, loud fart can, and to top it all off reverse indiglo guages :rofl: and i will ride in with a YELLOW donut in the front :D :D :D :D :D

[KiDyNomiTe]

True, but you are grandmaster leo, bringer of kazama, provider of silvia front end:D (did those ever come in?)

[1fasts13]

bwahahaha, grandmaster leo ehh?? ;) i will have to :bowdown: to myself!! :D

conversions are being on the ghey, but i hope to see them sometime this week....at least art finally got his :eek:

[pearlwhiteS14]

james I am going to Indy to pick up that s14 trans for my car. I want to do the swap myself but if you would like to help I would be willing to pay for your help? Let me know, thanks Duff on looking out for me and the swap, I need to get that F&*king auto out of this car. I looked in the XS turbo kit and I think it will be put in this spring???? talk to you guys later it is getting late and I have a prettyn young lady on my shoulder asking me to go to bed.:eek: :eek: :eek:

[KiDyNomiTe]

has art put his on yet? and got it painted? oh btw did he get the halogens or projectors?

Speaking of halogens, James are you really getting rid of em or just still waiting for the perfect car? Giving up halogens is a sin :hammer: , I just like them over the projectors too much :D .

pearlwhites14 - big plans so soon, hope you stick to em, god knows I didnt:rolleyes: , no more major planning for me, just save and spend now

[X1nom3D]

man, you guys really know how to make someone feel welcome :) if i get my stage 2 clutch in on time... maybe i'll see all of ya there! thanx a lot!

[KiDyNomiTe]

Originally posted by X1nom3D
man, you guys really know how to make someone feel welcome :) if i get my stage 2 clutch in on time... maybe i'll see all of ya there! thanx a lot!

You'll find out that we are only jackasses on the board ;)

[MI SO FST]

Originally posted by James
And good god- copy that list from Art already- I never understood why it was this hermit named Art "owns" a list of area 240 owners but doesn't post on any forum or participate AT ALL in online discussions like answering questions or planning. There are new people coming in all the time -none of them are on that list- we should've taken initiative a long time ago. That surprise all Nissan meet last month couldn't even be announced to everyone- "cuz we always have to contact Art":hammer:
- I understand he actually has a life that doesn't include chatting on the internet. But this is where everything takes place.



Ok James, I dont see what your problem is having to be negitive towards me. Everyhing that you have ever said or replied back about me is always some kind of way of putting me down. The list that I have is a list that I put together, I dont know where the word "owns" come from. I do participate in online conversations, just cause I dont talk to you dont mean that I dont. I talk to UIUC and Kidynomite online. Dont forget that I am the one that put the meets together too. I chose the place and time by myself, now someone else is doing it. All you people that go online and talk, my sn is MI SO FST. Talk to me, ask me, bitch at me. I talk to so many 240 people. They just are more into asking stuff about the car not meets. I bring cars to the meets that arent even on forums.

[KiDyNomiTe]

To make things easier on Art or me (whichever one of us decides to add e-mails to the list), could you guys that don't get an e-mail in the next few minutes post up your e-mail address or pm me with it.

[nismofeind]

hey, If somebody wants any ka stuff i have all my old ka parts.
just let me know if you want it and i'll try to get it to you on the 20th. i'll let it all go for pretty cheap.

[pearlwhiteS14]

do you have a manual trans from the ka and what about the ecu? let me know

[MI SO FST]

Originally posted by James
MI SO FST, You have impeccable timing!;)
Good to....er, hear from you this year!:p
So anyway....That's not how I operate. Using "your list" and adding new owners/users is to make things more efficient/up to date- it's not an insult to you.
You've got PM :D .
I hope this means you're going to post/reply and chit-chat/answer questions with other 240 guys more often other than announcing "your annual meet" and whenever you need to sell stuff.
So...Anything else to contribute besides thinking I have a beef with you? Any thoughts on the meet we have planned, ya coming?... etc etc etc....How's the car running/coming along? What do you think of Kid's 240 purchase? Stuff like that....chit chat. By the way- how come you don't post on here except when you annouce your meet or when you sell stuff? Does it bother you if your list is handed to someone that actively participates on forums and can gather/add new names/make better use of it?
- welcome (back) to Zilvia!:coolugh:
{everyone welcome MI SO FST to Zilvia!!!}

I dont care if you take my list and make it grow, thats fine by me. I reason I dont reply forums is cause I dont really have much time to get on. I answer questions to people all the time, but on AIM. At the meet, I talk to many people, just cause I havent talk to you much doesnt mean that I dont talk/SMILE at the meets.

As for my car, its not running good at all, I just recently messed up my head by blowing out a spark plug and breaking my coilpack. I am looking for a new SR head right now if any of you know anybody. If I can get my car to the meet, I will be there with it, if not then I will be there with something else.

[gmgs14]

So what's this I hear about a signal drift exibition in Toronto the same day as our meet? I know that's far away for most but just hoping nobody's going to skip out on the meet to hit this up unless we all want to go! I'm just hoping for a lot of cars this time at the meet.

[MI SO FST]

James: I dont have a sister and mikey does know who took his car, he is just waiting to get some more info on it. I did call soko and they dont just sell the heads. The threads where I put in the plugs are striped. So i think its better for me just to get a head. Do you have any spare wiring harnesses that go to the coilpacks? That is another think that I need. Let me know and thanks.

[KiDyNomiTe]

Originally posted by gmgs14
So what's this I hear about a signal drift exibition in Toronto the same day as our meet? I know that's far away for most but just hoping nobody's going to skip out on the meet to hit this up unless we all want to go! I'm just hoping for a lot of cars this time at the meet.

Well I doubt anyone will go there, or at least hope people from chicago won't go, its quite a trip.

There will be some drifting meets this side hopefully if everything works out, but I am sure you'll hear about it when the time comes.

[Bill Roberts]

This may sound stupid but they make inserts to replace stripped spark plug holes. The head will need to be removed probably to keep metal shavings out of the cylinder but I think this think is called a helicoil. I actually had a mazda truck that I blew a plug out of and took it to a machine shop. The bored the hole larger, put an insert plug in the hole, and tapped the inside of the sleeve for my sparkplug. I never had a problem with it. They had to press the insert in with a 10 ton press...being ever so careful to not damage the aluminum head.

If it is cut right and tapped right, it will be solid. They also said they could make a threaded insert. I opted for the "bushing" press fitted and lock tight was also used. Solid repair.

It can be done...much cheaper than a head replacement.

Fellows, we have a company event "to be announced" that might shoot a hole in my plans for coming up there and hanging out...right now...it does not look good..perhaps next spring around May if that is feasable.

Their is always something getting in the way of my plans. Have not been able to hang with my friends in my home town since Jan 02...

Do try to get that repair done...much better option than a new head IMHO.

[DuffMan]

Yeah, Bill's got it. I was about to post that but you beat me to it. Helicoils can fix this. I bet a machine shop could take care of the whole process once the head is off. I had a 85 fiero with an iron head and the head had major rust arround the spark plugs, so I had to look into that. I ended up not doing it, but from what I understand it should be very reliable.

James I got ecu and harness, and even tested them, they are working. SR gets delivered tomorrow, I'm giddy :D

Damn you already got to the valve cover I just paid for it today. Still not sure exactly when its going in, I'm debating whether or not to go with a greddy pan. It doesnt really go with my whole ghetto-jury-rigged theme I've got going. Most likely it will be going in soon, but its flexable so I can borrow the hoist whenever you're not using it.

[X1nom3D]

well i was reading and i sorta got lost somewhere. so is it at miami woods?!?! on the 20th?

SORRY!!!

[KiDyNomiTe]

Yes its at miami woods, at the corner of oakton and caldwell, there are two entrances to the preserve. One on caldwell and one on oakton. Enter on Caldwell cuz IIRC they are two different sections.

http://www.geocities.com/chicago240sx2003/mqmapgend.JPG
Go there you might have to copy link and paste in new window (geocities sucks).

And yes its the 20th saturday, get there around noon.

[JDM180SX]

James - Thanks for the victory update...I'm gonna try to snag those SE wheels (unless someone one zilvia needs some money and wants to sell thiers?). I also talked to Art about the FB. But once again thanks for keepin an eye open.

I'm all good for the final date/time. I'm gonna drag my sis and her 240 out to the meet also. Even if I have to drag her out of bed. Hope to see everyone there.

-Eddy

[pearlwhiteS14]

Where and what is Victory? I would be willing to come out.

[DuffMan]

Mini-meet at victory sounds like a good idea. I havent been there in a while.

Btw, I removed the oil pan from the sr and found a lot of sludge in it. Anything to be woried about? The only engines I have torn down before are my 2 busted E's and they had sluge but were sitting for a while with the heads off.

[Bill Roberts]

Sludge means the oil was allowed to turn black before a change. All pans will contain sludge. INMO, Turbo cars should have oil changed the moment one notices a change in oil color from new or a change in the smell (contaminants).

My engines (all of them) have been changed this way. you take the top off, they all look brand new, nice and shiny...sometimes 600 miles is too long, othertimes 3K and still perfect.

Check for color and change.

I suppose an old woman owned it and did not care...or it was simply not kept up.

Hope this sheds some light.

[DuffMan]

Well the oil was drained before i got the engine so all i have is what is in the part of the pan lower than the drain hole. I'm not sure if that is just from sitting or is it normal for sluge to form at the bottom of an oil pan?

[JDM180SX]

James and Duffman....Mini meet at victory is cool for me, I'm up for it. Want to meet somewhere (my work is on harlem and belmont, on the way there...or the mall is cool too on harlem and irving park?)? otherwise meeting there is cool too. lemme know what works for you guys.

-Eddy

[KiDyNomiTe]

lol you victory whores, :p.

Anyways there is an S14 with a 3 inch cat in lockport if anyone cares, although I think someone else is claiming the seats (not to sure anymore since he might sell his car). The whole front end is torched though, and not sure on lsd. The guys over there are jackasses and didnt know what an lsd was, and didnt want to lift the car for me to do the wheel spin test. Theres also an s13 from what I saw, prolly more in there.

All imports, but you cant just roam around in there like victory which sucks.

[DuffMan]

I need the hose that connects to the clutch slave. I also could use a sunroof and a V6 nissan ignitor if they are cheap enough.

[nismofeind]

what 240's do they have at victory last time i was there thye had 3 89-90's

[nismofeind]

what 240's do they have at victory last time i was there thye had 3 89-90's

[BeatJunky]

JDM180SX: You work at harlem and belmont? Im in that area every stinkin day!;) Would be really nice to hang with some of you locals every now and then.

In either case, I will definitely make this meet now that I have what I like to call a 240. It needs sooooo much work but maybe I can get some "live" help n tips from you fellas at the meet.

Miami Woods? 20th?

I'll bring a friend or two ... If they're up for it you may see an '02 WRX, a 3rd Gen RX-7 TT, '01 Firebird V6 (crapcar) and perhaps a 95 240 with skyline tailights and KA-T in the works.

Hope all goes well... I'll be there with my barely running '90 Coupe.:D

:hammer:

:::edit:::

BTW, Im wanting to swap in a reliable KA24E SOHC into my car to use over the winter so if anyone has one available please let me know sometime this upcoming week and I will arrange a price. Im also in need of working gauges... HUD too...

I hope someone is selling a good KA...;)

[nismofeind]

I was wondering if anybody wanted to go driving tonight around 10 or 11. tonight. (saturday the 6th)

[KiDyNomiTe]

BeatJunky - you could always get a dohc, not too much extra work, guess it'll really come down to what has a better deal. There should be a write up on it somewhere on the board.

And ya the 20th at miami woods, noon, bring whoever, its all good.

nismofiend - James said there is a an 89 and a 91 (5speed), but pretty much stripped. Those cars get stripped so quickly.

[X1nom3D]

*sigh* finally, my clutch is in, so there's a very good chance i'll be coming to the meet, along with my buddy and his supra (after we change his head gasket).

[willcheung]

Me and my S13 newbie friend may go, please give location and time, need the real location therefore i can Mapquest it, since chicago is so big & confusing. thanks

also gmgs14, if you want to head together on Sep 20 to chicago, we can do that. Meet you at GR first.

one more thing, I am selling my d-speed spoiler & VIS shogun style rear bumper add-on, if some one are interested I can bring it with me to the meet. therefore save some shipping cost

will

[gmgs14]

Will, that's cool, I'll PM you with directions to my house, it's right off 131 so you won't be going out of the way.

[KiDyNomiTe]

Well for directions, there is no address, so just punch in "Oakton and caldwell" dont remember if they are streets or avenues, but it should point you to the intersection. gmgs14 i sent you a pm about it, but after you get to the intersection, you'd be going north on caldwell (its the curvy road), then turn right if you are driving north on caldwell, the preserve(trees) will be on your right, if you are going south make a left into the preserve, there is a sign and only one entrance on caldwell.

Call me @ 847-606-0844 if you get lost.

[BeatJunky]

Yup... DOHC or SOHC... Best bang for da dollar. Someone let me know whats up with an engine by the meet date.;)

[pearlwhiteS14]

Guys I saw a hot S 15 this morning on highway 53 at he Army trail Exit. It was done up really nice. It had exhaust and black tinted windows. I was doing abut 75 and he passed by at about 90. Nice car and I wondered that he might be on here?

[DuffMan]

Oh no, you got banned again :hammer:

Haha well hopefully it's only temporary. What happened?

[KiDyNomiTe]

Originally posted by pearlwhiteS14
Guys I saw a hot S 15 this morning on highway 53 at he Army trail Exit. It was done up really nice. It had exhaust and black tinted windows. I was doing abut 75 and he passed by at about 90. Nice car and I wondered that he might be on here?

S15???

I highly doubt you saw an S15, there are very few in the US, kind of a waste of money IMO.

But ya there are lots of S15 front ends on S14s, eclipses, integras, Camry :confused: :eek: , prolly more but thats all I have seen so far.

HAHA James banned again, is this like your 5th user name.

[BeatJunky]

I was cruisin down harlem ave today, going south towards grand ave. when i saw two 89-93 hatchbacks (one black and the other gold) one right behind the other going northbound at around 4pm today the 8th.

Just wondering ifs anyone from the boards...

[pearlwhiteS14]

it was a new silvia because it had a shark eyed lights and the rear end is not the same as my car. It was no body kit either.

[KiDyNomiTe]

I finally got some time and updated the site.
http://www.geocities.com/chicago240sx2003/

[JDM180SX]

Originally posted by BeatJunky
I was cruisin down harlem ave today, going south towards grand ave. when i saw two 89-93 hatchbacks (one black and the other gold) one right behind the other going northbound at around 4pm today the 8th.

Just wondering ifs anyone from the boards...

BeatJunky - were you in the maroon coupe? I was chillen outside of my shop about that time and I saw a white coupe then a maroon coupe w/an exhaust. My car would have been in front on Harlem but I had just moved it to my lot area.

Yeah, those two were headed to my shop...One is an aquaintance in my field (Black hatch) the other is his friend (gold hatch). I switched front bumpers with the gold one (swap + some cash my way). Both of are kinda ricey, they started on their cars before I could help em out. But, I still need another stock 91-94 bumper guys!

Anyway, I'm thinkin of taking them to the meet coming up but you guys guys have to be nice! Don't blame them for how their cars look. I'm tryin to guide them away from the ugliness and they don't need more ridicule (although I do laugh at them a bit when they leave :D ). K, we'll see if they show or not.

-Eddy

[KiDyNomiTe]

haha bring your ricey aquaintance and friend :D. Its all good, the more the merrier, maybe we can all guide them with our mainly stock looking cars :D.



Anyways its looking as if we should have a pretty good turnout, imma try and recruit a few more people from the clubfr meet.

[BeatJunky]

Originally posted by JDM180SX
BeatJunky - were you in the maroon coupe?

Hahaha.... yes that was me...:aw:

I actually turned around and tried to see where they were goin' (boy im a loser). I have no firends with 240's...lol

We should meet up. You're in my general area.

[JDM180SX]

Originally posted by BeatJunky
Hahaha.... yes that was me...:aw:

I actually turned around and tried to see where they were goin' (boy im a loser). I have no firends with 240's...lol

We should meet up. You're in my general area.

Anytime you wanna come by my work, feel free. I don't do much, especially at the end of the day. I'm at Harlem Cash Register, 3311 N. Harlem Ave. If there's no parking in front, I have a lot around back you can use. Come on by. That goes for anyone else doing nothing, Hee hee hee.

-Eddy

[gdrum]

I am from middle of indiana...indianapolis area. I am wanting to come in my 89 SR 240 but need directions. Ill be taking I65. I just want directions where to meet or what not so i can type it in on mapquest since i do not know the area...or a place to meet up before hand. Time...date...etc... let me know thanks!

[KiDyNomiTe]

tp in "oakton and caldwell" for address
niles, il for city/state. itll show up, entrance is north of the star. you should see a road going into the green area on the map that is generally the entrance, but i am pretty sure the road doesnt go thru to the other side, so make sure to use the entrance north of the intersection.

[FoCaL]

Im intersted in coming up from STL. I got the driections, but what time is everyone meeting? I wont know anyone, so this should be fun. :) Maybe I can see if a few more STL guys wonna come up with me.

[KiDyNomiTe]

Try and be there around noon, at about 2 we will be heading off somewhere else.

I dont even know everyone at these meets and I have gone to just about every one since last year, so nothing to worry about, we are all strangers

[pearlwhiteS14]

everyone should try and make this meet! Let's get the most 240's ever at one meet at the same time.

[KiDyNomiTe]

Ya lets get a bunch of people out here, we had a pretty big meet a couple months ago (the last one at Miami Woods), so hope to see you all out thereon the 20th).

BTW anyone on this board claim ownership to the black s14(with 5 spokes) in Aurora, or a red fastback with temps that I was driving behind in my car (look below)?

[pearlwhiteS14]

was the black one with tinted windows and exhaust on it?

[KiDyNomiTe]

dont remember about the tints, but it didnt have exhaust

[jenne313]

I am going to come up for the meet with my black sr, as long as the weather cooperates and I don't have to drive in snow! (I live in Ohio, it starts snowing here around the end of August, and snows until June 15th or so).

I would like to meet up with some people and cruise together - anyone coming from this area?? Akron, Canton, Cleveland, etc?

PM me if interested. Also, I would appreciate someone giving me their number so I can call if I get lost - I have never been to Chicago before, and am a little concerned about the drive.

Thanks so much! Get at me!:D

[KiDyNomiTe]

Hey thats great Jenne, always could use more girls and SRs (dont think we have any blacktops).


Anyways check your PM.

[BeatJunky]

Met up with Eddy (JDM180SX) today for about 30 minutes. Introduced myself and chatted for a while. Im really looking forward to the meet. Ive been pretty stressed out with my car but after talking to this guy for a lil while I realized my car isnt as bad as I make it out to be. With the help of a willing few, Im sure I can find my way to a better running beast before swap time comes.

drifty drifty drifty... :bowdown:

-Omar

[kumanchu]

i may make it out if my jank ass 240 can make it. i'm in chicago right now, but i think one of my cylinders is misfiring :(

anyone know of RELIABLE people that could put in a black top s13 sr around here? i don't have the room to do it myself at school.

[BeatJunky]

www.jdmspecperf.com

[X1nom3D]

Originally posted by kumanchu
i may make it out if my jank ass 240 can make it. i'm in chicago right now, but i think one of my cylinders is misfiring :(

hey, what are the symptoms?? is your engine shaking uncontrollably?? if that's the case, then check out the injectors. Mine did that once, drove around with 3 injectors thinking i was a hotrod, hahaha. okay, well, i hope you make it.

[kumanchu]

Originally posted by X1nom3D
hey, what are the symptoms?? is your engine shaking uncontrollably?? if that's the case, then check out the injectors. Mine did that once, drove around with 3 injectors thinking i was a hotrod, hahaha. okay, well, i hope you make it.

hehehe yeah it sounds like some crazy american 8 right now. even last night a camaro was eyeing me and gave me the thumbs up at a light. i was like :coolugh:

i'll check my injectors this weekend when i have time. is it ok to drive around on it this way though? i need to get to wushu!!! wushu!!

[white24D]

Originally posted by KiDyNomiTe
Hey thats great Jenne, always could use more girls and SRs (dont think we have any blacktops).


Anyways check your PM.
w00t! did u forget about timmah???
oh and to the person who said jdmspecperformance is reliable with sr swaps..i havent seen much come out of there...i would more recomend www.tougefactoy.com thats whey i got all my stuff,i did the swap myself with crab spirits(brian) NB8CT(rob0 ,my buddy philly ,slo86(jesse) was over for a while too but DAVID is the guys name,very helpful came out to my house to help out a few times,hooked it up with a sr service manual on cd to help,really cool guy ..i need to call him soon...

[KiDyNomiTe]

lol ya I forgot all about you. I was going off of what I have seen at meets, and you still had the KA at the last meet I saw you at (pretty sure thats when your motor blew).

But fine you and jenne (jennifer, jenny, whatver you wanna be called), have one thing in common. But one thing you dont have in common, is she's hot and your umm...

your tim "the asian plower" :p

[X1nom3D]

Originally posted by kumanchu
is it ok to drive around on it this way though? i need to get to wushu!!! wushu!!

yea, it should be okay to drive around with it like that for a while. when it happened to me, I drove to a few shops and had them look at it, i swear they don't know what they're talking about. one guy said my rod blew, and blah blah blah. so that it would cost me a bit over a grand to get it fixed. boy, i had no money, so i was forced to drive with 3 injectors. and plus, i didn't know what was wrong with it at the time. i thought it was the ignition, but then, i changed the whole thing, later on, i knew it wasn't a broken rod because once in a while, the faulty injector would resurrect itself and work again, so i knew it was a fuel problem. it's better than DRIVING with all 4 injectors but only 3 spark plugs, cause you'll have a bunch of unburned fuel in the chamber(although this is cheaper to fix).

[pearlwhiteS14]

I emailed jdm in plainfield about doing my swap in the spring and they told me they have not done one yet. They said that they would give me a break on the labor cost because they want the practice? It makes me a little worried. GRD in Naperville said they would do it and then dyno and set the new computer perimeters.

[willcheung]

Originally posted by pearlwhiteS14
I emailed jdm in plainfield about doing my swap in the spring and they told me they have not done one yet. They said that they would give me a break on the labor cost because they want the practice? It makes me a little worried. GRD in Naperville said they would do it and then dyno and set the new computer perimeters.
Do the swap yourself therefore you can learn how to do it. Ask couple friends to help you, buy them lunch or dinner or something.

[pearlwhiteS14]

that is what i was going to do from the start, I just wanted to see what they would charge me.

[white24D]

pearwhite...my advice to you...im one of the youngest many of you know with a sr... i tahugh tit was a great experience for me to learn ,what the helli was doing,why iw as doign it and what if somethign goes wrong,i can usually pin point teh area...man before i would look at my engine i could point out the major things but now ,pint at anything in my bay and ill lecture u about it. dood seriously...do it your self,not matter how long it takes...i ahve a thing that no offence to jdmspec but ff guys are ff guys..not FR at all so really get in contacct with me and ill be willing to give a hand.

[DuffMan]

Yeah, doing it yourself would probably be best. GRD has a dyno but I seriously doubt they can tune Nissan ECU's unless you buy a full standalone. It would probably take them forever to finish it, assuming they even can.

I'm doing my swap myself right now so I can offer some help. I'm not a great mechanic, but I'm pretty good with wiring.

[white24D]

dood if either of u guys need a sr to look at give me a call heater hoses are one of the last things that i worked on b4 she was put in and damn were those gay...its a little puzzle..but really just contact me and we will see what we can dood...dont forget we will be having a drift event next month ..so get those car running boys...haha im the asain plower thanks simba...doood it wasnt me! tony left it in gear!

[kumanchu]

well i'm in college; far far away from home. anyone want to offer their home/garage/driveway for me to do the swap too ^_~

i originally planed on saving up and doing the swap this summer, but the misfiring ka might be accelerating those plans if i can't fix it cheap.

[1fasts13]

sorry this post is so damn long i'm not gonna look on every post, but did the meet get switched to sat? if so i cant make it :mad: :(

as for the people talking about SR swaps, yes we havent done one yet but that's only because no one has given us the opportunity to do one. we all know engine swaps are not the hardest thing in the world, as a matter of fact the only thing difficult to do is the wiring. for comparision purposes, a few years back before the H22 into EG (92-95 civic chassis) became real popular me and my friends were one of the first ones to do them and we even had a complete do-it-yourself CD circulating for quite sometime. and that was the most ridiculous wiring job from hell that i can imagine. so if we can handle that i dont see how we cant handle the SR wiring particularly since one of our guys did work on a friend's 200SX which was being equipped with a bluebird (the wiring from that one to the RWD SR should be pretty similar). but anyways of course doing it yourself is great and since a few ppl around here are available for help and with all the tools/resources available online i wouldnt see any reason why you cant do it yourself. just make sure yall come talk to us to pick up the swaps :D

BTW i have a few S13 front end conversions in stock now and a few local guys i brought it in for flaked on them so anybody that wants or is looking for it give me a call :cool:

[DuffMan]

Yeah I don't understand all the strife about which shop is best. I think we should just be glad that Chicago has some cool shops unlike before where shops would start swaps, take for ever, and give up half way through.

Of course, I'm too poor to actually pay someone to work on my car, but its all good.

[stuntman240]

Hi, I will be there on Sat. for the meet. I am bringing some S14 seats for Kid, and if anyone needs any other S14 parts I have them listed in the for sale section, and I am willing to deliver them to Chicago for the meet this Saturday, at no extra charge!!! So let me know off list if you need any S14 parts, the list in the for sale section is up to date.

I am coming from Cedar Rapids Iowa and will be comingover Friday night and staying with my friend at IIT, so see you Sat!!

[KiDyNomiTe]

Glad to see you are all so willing to be helpful with swaps, cuz imma need some hands come next year :D .

Of course anyone doing a swap I would also be willing to lend a hand, mainly just to get some first hand experience with swapping, plus I am pretty bored.

Tim - anymore news on a date for the event, or is it still just sometime in October.

[TopStreet_KA-T]

hey im new to Zilvia but heard that this thing was going down this weekend. I hope and I can come and bring my turbo ka down. ( I put the motor back in today and hope to have the intercooler pipes and exhaust done by friday (cross fingers).

[pearlwhiteS14]

I think that if I went to a shop that it would be nice to go to one that has a rep for the proper car. GRD brings in the specialist for the wiring, and he sets the chip for top performance. This is coming from my buddy who has the product to show for it. He might come out with me on Sat. He has a wrx but is going to do a silvia for his nest project.
James-- are you up for the swap in the spring? and how is your project going?
Duff--- Do you want to drive up Saturday together, what about uiuc???
Let me know? How is you turbo project going?

[KiDyNomiTe]

Originally posted by pearlwhiteS14


Duff--- Do you want to drive up Saturday together, what about uiuc???


How dare thy forgeteth me.

I am also a west suburbian. There are quite a few of us out in the south 88 West of 355 region.

If anyone does want to go together I will be going somewhat early, like 11:00 , I will try and be there early just cuz a few of the out of towners have my number and just incase they arrive early, don't want them to be sitting around and not knowing if they are in the right place.

I live in Bolingbrook just to let you know.

[X1nom3D]

Originally posted by TopStreet_KA-T
hey im new to Zilvia but heard that this thing was going down this weekend. I hope and I can come and bring my turbo ka down. ( I put the motor back in today and hope to have the intercooler pipes and exhaust done by friday (cross fingers).

okay, THERE you are!!! welcome to Zilvia.net. i hope you get it done man, i really hope you do. i've been trying to find my other buddy around the franklin area with the 91 coupe w/ a redtop sr20... but couldn't get a hold of him, he must be busy or somethin. i don't even have his number, haha. well, i'll see you later this week. or whenever we can go pick up the shocks, springs, and wheels.

[pearlwhiteS14]

Sorry KID I will never let it happen again. Ya maybe we can all get together adn role up to Niles. Put a place and a time to travel from on your reply and I will be there. Maybe Jewel parking lot 53 and Maple ave??? I am looking forward to Saturday!

[Crab Spirits]

I'll be there of course.

[KiDyNomiTe]

Hmm I say we meet up a little south of that Jewel. Mainly cuz it'll be a bitch getting in and out of that place (well if there is more than a couple of us).

So I say meet up in front of the starbucks on Rt.53, its inbetween the Krispy Kreme and Cinmeark/IMAX theater. Its easier to get in and out of, plus easily viewable from road.

So between Maple and 75th Street on Rt.53. For those who dont know where Maple is, its south of Ogden (Rt. 31 or is it 30). Try and get there by 11 (call me at 847 606-0844 if you can't find me)

Just incase you don't know how to get there follow this: (anyone coming with I'll tell you again just incase we lose each other)
Taking 88E to 294N, exit at Dempster East, Follow Dempster east, then flip off my old HS :p , then right on Waukegan, merge left to caldwell, turn left into Miami Woods.

I'll call Eric tomorrow (uiuc240) and see if he is coming to the meet at all.

EDIT: Its 90 cents in toll to get there (one 40 and one 50), and two 40s to get back.

[DuffMan]

I can be there, what time should we meet.

btw, is that 9000rpm tach installed in your car? If not bring it, since my other 240 should be revived from the dead in the next few weeks, and i could use it.

[KiDyNomiTe]

My guage surround is out, so I'll bring a screwdriver and my old tach. Gotta enjoy the last few moments with the ever so special tach :wtc:

EDIT: be there by 11

[white24D]

i was wondering if any southsiders are going ,i wanna follow someone me and north side burbs arent to fond of eachother

[gmgs14]

Originally posted by white24D
i was wondering if any southsiders are going ,i wanna follow someone me and north side burbs arent to fond of eachother

There are a couple of us coming from Michigan, we'll be passing through the south side. You're welcome to meet us.

[Crab Spirits]

Does anyone have a spare S13 coolant recovery tank they want to sell? I decided to test mine's durability with my finger.:hammer:

[KiDyNomiTe]

Go to victory you lazy bum, I am gonna be going to a junkyard in aurora if I don't pick up my hatch tomorrow, I'll see if they got it.

[pearlwhiteS14]

Starbucks sounds cool, I'll bring a cooler of beer - any prefence?

[kumanchu]

i'm in the southside... lets meetup somewhere; i'm at 33rd and state.

[LigouriRd]

I just found out about the Sept 20 event at Miami Woods. Unfortuneately I am working that day till 6:00pm :cry: Any one going to the AutoX event at Route 66 on Sunday? Ill be the one there with the red early body style S14 with Konig GTR rims.

[pearlwhiteS14]

Looks like there will be about 20 to 25 cars that will be at the meet on Saturday! That looks great!

[white24D]

dood screw scca ... windy city miata is where it is man... there is a mita category and a non miata category EX;porche and rx7s my s13 ,my buddies ,an 86 .... but ya dood screw working for about 2 hours...here u work for about an hour tops and u get in about 8 runs gaurenteed ...so much nicer,ever one is really laid back too...

[KiDyNomiTe]

geez tim you don't tell them that rx7s and porsches can run, thats just not fair.

Don't they have a bunch of little categories that go by average time then take the best time?

Or is that a diff club?

I am still gonna try and make it there, dunno if I will have any money but we'll see.

[white24D]

na kid its pretty vague,if ur not a miata ur in one class,which is fine for me cuz imnot in the points race ya know? but kumanchu i have work till 12 wanna meet up somewhere near i-55? u know where the 47th and pulaski street races are? well i55 is right there,wanna meet at that bk at around 1? i have no clue where im going in the northburbs besides alrington,hanover,etc peace also if you want to do the autoX u need to RSVP,it takes 2 secs go to windycitymiataclub.com and click on the event down the page. september 21st?ya i think and then at the bottom of that page click to rsvp

[jtdragon]

Hey everybody!

Alright, another meet!:w00t:

Got class in the morning, but should be their @ 1:30pm.:mrmeph:

Look forward to meeting everybody!:bowdown:

See you tomorrow!!!

Jtdragon

[uiuc240]

Sorry dudes, I have had plans for over a month to go to Peoria for International Beer Fest. I mean, c'mon...how can you pass that up?! It's BEER!

So, try and have fun without me and my lumpy-idling beast ;)

Maybe next time there will be new parts on my car. Oh, this time you would have gotten to see my recently de-riced headlights! I took out the PIAA bulbs (one died) and put in the Hella bulbs that came from Don. Good lighting, just a little yellowish. Oh well. Attracts less attention from Johnny Law.

Peace out.

Eric

p.s. I'm not around much because of two reasons:

1. Work. Burns me out and keeps me busy (no more time for Zilvia at the office).
2. Girlfriend. She's more fun than typing. Hahaha. I'm sure that will wear off soon enough. :D

[DuffMan]

:axe:

Damn you and your beer swilling, girlfriend hanging-out-with self.

I can understand not having Zilvia as a priority though. It gets lamer every day. Are you planning to throw that T28 in your car soon? My garage should be open soon. I plan to get the SR in and limp my POS out into the parking lot with just an open throttle body.

[KiDyNomiTe]

Great Meet! Thanks to all those who came out, a lot less than I expected, but its all good. Thanks to the out of towners who made the trip.

Here is a quick run down on what happened:

Got to Miami Woods, stole a table from some italian picnic, never gave it back. Killed some bees, sat around and talked for a few hours.

Then we left for some food, of course Dave let his stomach lead, but he decided to take the long way and lost the rest of us, and left Crab to lead who in the end got us lost. So I had to lead us back, but I think I made everyone run some lights. Leading ~10 cars where only two people knew where they were going is a pain.

Got to portillos ate talked a bit more, then most of us parted ways.

Me Duff and the banned guy stuck around in the parking lot talking for like 4 hours, got a lot of funny looks from people. Spotted some nice rims on an FC, anyone know if they are 4x100 or 4x114.3?

After standing in the portillos parking lot freezing out asses off we headed to McDonalds for like another 3 hours and ate again, and talked about funny schemes that would make Duffs install cheaper :D.

So basically we spent 12 hours on a meet :D well just the 3 of us.

Now to install my s14 seats (thanks stuntman!), and install the "mystery tube"

I will have pics up soon just gotta figure out why Imagestation is being stupid.

P.S. The banned guy says hi:)

[gmgs14]

Here's a link to the pics I took:

http://www.imagestation.com/album/?id=4289061791

[willcheung]

Nice pictures greg.

[stuntman240]

Yeah nice pics man. Thats the first decnt picture taken of my car in a long time.

How much for side skirts man?

Was awesome to meet everyone and be able to shoot the sh!t.

[BeatJunky]

Originally posted by stuntman240
How much for side skirts man?

Dem was nice...:bowdown:

Meet was a good time. Im in the process of ordering some toys for my S13 so come next meet I wont be so stock... ;)

-Omar

[Crab Spirits]

Hey man, It wasn't my fault. I called Dave after he took off like a bat out of hell and he told me the wrong street.

Where the hell was everybody?!!! A nice day. What the hell?
A list must be prepared of all the deadbeats. I want inquiries made!!!!:axe:

It was cool meeting everyone.

Stuntman, I should have taken your number. After the meet, I put in the Cusco and now I'm all antsy for some Tea Party action.

Phay, your car has inspired me to paint my car bass boat stylee.:boink:

[pearlwhiteS14]

It was nice meeting everyone, Nice cars!!!
Duffman with this rain I don't think I will get out today after school to that junk yard, maybe tomorrow? Let me know when you are doing the swap I would like to be there to watch and help if needed?

THanks to everyone for the info sharing and ideas!

Nice pics greg

[KiDyNomiTe]

Originally posted by Crab Spirits

Stuntman, I should have taken your number. After the meet, I put in the Cusco and now I'm all antsy for some Tea Party action.


You got it already? I thought you just ordered it? Hopefully you dont spin out so much :bash:

Don't you know sharing is caring, you dont need BOTH your LSD and coils, I say donate the coils :cough cough: and a set of rims:cough cough:

I'll take the wats since you never use em, they must be lonely:)

[JDM180SX]

Wow, I just barely made it to the meet. My battery had gone bad Friday night and I had to spend the first few hours before the meet buying a bettery, changing the couplings and ghetto rigging the wiring just to get there, late. BUT I got there and I'm glad i made it. Lots of cars, new people, old people w/new things. Good to catch up w/everyone. I'm happy to see everyones projects getting closer to completion. Hopefully by the time the first meet comes around next year I'll be done and my sisters 240 will have some more work done to it. Hope to catch you all out there on the road!

-Eddy

[stuntman240]

My fault man I should have called you, but I was a little tipsy. Oh well just another excuse to come back man.

I will be back Oct. 16,17,18,19 for my court date and then to party cause we have one of those three, I mean four day weekends. So Ill be down for going then, if not before then.

[1fasts13]

too bad i couldnt make it to the meet, looked like fun....NOT!! :p

kinda funny, kid stopped by today to take pics of front conversions for will, i would've thought he would ask me for pics, but ok that's fine lol.....i hope you guys are not afraid to talk to me or something :D makes me kinda feel like the banned guy too :doh:

eddy give me a call sometime, i got your goodies on the way ;)

[KiDyNomiTe]

I wanted to stop by and see the shop anyway, and its sorta on the way from coming home from school.

Ask why hey banned the banned guy maybe they'll ban you, or maybe they'll keep you cuz of your kazama parts :D

[KiDyNomiTe]

viva la mystery box, after hours of ghetto rigging and kicking it a few sparks, it works.

One of these dats I need to go and clean it up, I just did it ****tily so i would know if it works. Thanks stuntman :D

[stuntman240]

Glad to hear it works well for yeah. How are the seats doing? And that fancy lumbar support.

[KiDyNomiTe]

The seats are freakin awesome. I liked my S13 seats, and never thought that the S14 seats would be that much better, but damn they are freakin great. Now I see why the 180sx changed from the ****ty seats we get to the s14 seats.

Anyone with an S13 get S14 seats, :aw: .


And you were right they do fit my body perfectly, not much moving in corners, although I have yet to push my car with em.

And my jdm signals should be coming in a week, I'm such a Ricer :), sleepy eyes, subs, turn signals, cd player thats all bright and ricey.:D

[X1nom3D]

Originally posted by Crab Spirits
Phay, your car has inspired me to paint my car bass boat stylee.:boink:

haha, is that so?

:aw: i had fun!!

love the turbos :drool: