View Full Version : Oil change problem
jdm213
11-04-2010, 02:16 PM
well I changes my oil on my KA stock and i put SAE 5w20 everything was fine but now when i drive it the idle goes up higher to like 900 and when i turn the steering wheel it makes a wining sound so im thinking of changing it agen to 10w40 castrol and see what happens can i get some input on this thanx
S14DB
11-04-2010, 02:40 PM
What's wrong with 10w30?
mattsil80wis
11-04-2010, 03:03 PM
check your power steering fluid
codyace
11-04-2010, 03:43 PM
5w20 is a bit thin for a turbo car. As S14 pointed out, 10w30 is the way to go for most SR's.
check your power steering fluid
Exactly.
Chaw wee
11-04-2010, 03:48 PM
Yeah sounds like power steering to me...
that sound is coming from your power steering, not your motor
jdm213
11-04-2010, 03:52 PM
its not a sr nor is it turboed, its a stock ka so im thinking eitther 10w40 or 10w30 my car has 124k miles ont it and i live in los angeleswhere its hot right now, plus my powerstreering revoir is full right now but it makes that soind, i dont know if the oil or the power steering is afeecting my rpm to be so high when its idling?
BKangS14
11-05-2010, 05:58 PM
i use 10w-30 and i live in arizona and idle at 900 is perfect for me..and check the power steering, oil wouldn't make your car whine when you turn your wheel IMO
Mikey88
11-05-2010, 08:10 PM
have someone turn the wheel for you and just pinpoint the noise yourself while under the hood.
Weedm
11-05-2010, 08:27 PM
10w30 mobil 1 would be good for you..
and that noise is your power steering. check hoses to see if any are bind and arent flowing rite. could be your power steering pump as well, as it can happen coincidentally after you changed your oil.
first thing id do is add power steering fluid.
Mikey88
11-05-2010, 08:46 PM
you using actual powersteering fluid or the proper atf? cause manufacture spec fluid is dexron 2 atf so dexron 2 or better...
S14DB
11-05-2010, 09:23 PM
You are using ATF not PS fluid in the PS system?
Mikey88
11-05-2010, 09:51 PM
You are using ATF not PS fluid in the PS system?
been using it on all my 240s never had a PS failure or problem at all..just put in whatever OE states
Pirate_Freder
11-06-2010, 12:55 AM
Me too, ATF is what Nissan says to use.
jdm213
11-07-2010, 02:10 AM
well ill check the ps resovoir tomorrow and see whats up with the lines, i never changes a power steering pump is it easy?
Mikey88
11-07-2010, 08:45 PM
if my little cousin can do it i think you have high chances of completing that task
jdm213
11-08-2010, 12:49 AM
if my little cousin can do it i think you have high chances of completing that task
looks easy, just a matter of tips or things i should do before hand if i do change it you know,
Pirate_Freder
11-09-2010, 12:39 AM
Download the fsm if u haven't already and it will tell u step by step how to do it exactly as a Nissan factory tech would.
S14DB
11-09-2010, 10:22 AM
New copper washers for the HP line.
MANOlOS14
11-09-2010, 10:48 AM
i would use 10w30, my ka had almost 280,000 miles and still ran like a champ.
jdm213
11-09-2010, 12:08 PM
i fixed the ps issue it just needed some fluid, but about the oil im trying to figure out the difference betweeen 10w30 and 10w40
codyace
11-09-2010, 03:13 PM
i fixed the ps issue it just needed some fluid, but about the oil im trying to figure out the difference betweeen 10w30 and 10w40
HowStuffWorks "What does the weight mean on a can of motor oil?" (http://auto.howstuffworks.com/fuel-efficiency/fuel-consumption/question164.htm)
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.