ka24e timing

[Krewlkid]

I currently have access to ARRC and ALLDATA, but i cant seem to find the factory Cam And Crank placement to properly place a new timing chain on a ka24e motor, any and all help is appreciated.

I pulled the valve cover off my parts car (which is running) with crank at TDC (2nd to last or red timing mark on pully) and the cam marking is on the right side level with head. so i figured scence this car is running if i duplicate it on the DD it will run also. but sure enough i cannot get the car to start. COG and dizzy were also aligned with CYL 1

Thanks for your time,
Sam

[copdodger]

Ka24e Timing Off? - Nissan 240SX Forums (http://www.240sxforums.com/forums/ka24de-t-ka24e/127526-ka24e-timing-off.html), this thread should answer your questions hopefully. i found it to be very informative

[dgomez]

there are 2 tdc per crank rotation. proper tdc should have cam lobes facing away from eachother