Anyone have an Idea how to fix this dent?

[Silvia_Blue]

Hey , Im trying to buy this 240 sx that this lady is gonna sell to me for $3000 dollars.......The problem is that there are some dents that i am gonna have to fix....Especially this one.....i wonder if its gonna be a pain to fix this and how much it might cost me if you can give me some info that would be great thanks!

[russian]

might wanna see if you can get in with a mallet from inside after taking the side pannel that runs along the line inside.

[SaintlyCharBoy]

go to an autozone or similar store, many will let you rent (usually for free with a deposit) a slide hammer. you drill a small hole, attach the hammer, pull the dent and fill the hole

OR

find someone with an arc welder (most any will work) attach small narrow pieces pf steel inthe deepest parts of the dent, grab them with vice grips, pull like hell then grind the steel "handles" off

OR

bondo - ewwwwwww:bash:

[Silvia_Blue]

A friend of mine told me i should drill two holes on both sides of the dent then with a good dent remover pull the dent out then fill with bondo and smooth it out. I might do this since i want to repaint the whole car

[DMC]

you could weld little pieces of metal too it like a frame then bondo it.

[SilviaDriver]

1] pull and bondo
2] cut it out and weld on a new one

[spindrift187]

hmmm.....what an odd place for a dent. I'd bondo that bitch like a 5 year old with play-do. Just goo the hell out of it!