ka24de wiring question

[Nkelley]

I am in the middle of building my ka-t, my car is a 1990 coupe so ive had to swap in the dual cam. i know that the only connector you have to swap between the harnesses is the white chassis plug from the "e" harness but my "de" harness was missing a few plugs from the beginning. Specifically the white 16 pin body connector just down from the ecu connector and the 2 connectors that connect the engine harness to the chassis harness (? believe thats it). on the "e" harness its a brown 8 pin and a grey 8 pin that connect the two harnesses together, the brown con. seemed to swap fine between the harnesses all the wires match. as for the grey connector the only similar wires are the black/red for the coil, the black/white for the c.p.s and the red wire for the injectors, is there a way to wire this plug onto the "de" harness or would i be better off just finding a new harness to put in?

-Nick

[projectRDM]

Look at it like swapping an SR into your car, and follow the SR wiring diagram to match the appropriate wires. It's been years since I messed with an S13 but there's only a few needed in both plugs.