PDA

View Full Version : First SR Rebuild


s14slideshow
10-16-2010, 08:17 PM
S13 Redtop Sr, got the motor in boxes and am starting to rebuild so I have some questions. There is some trauma to crank from a spun bearing. I was hoping someone could point me in the direction of where I could get stock specs of what everything should be on my SR so I can take a print out to machine shop.

At this time i'm needing specs for rod bearings, main bearings, and I am going to get my cylinder walls checked. I know everyone says that there is a stamping that tells me the bearings I need, but since I have an abused crank I would rather have the measurements. Thanks in advance.

Options13
10-16-2010, 10:24 PM
fsm is your best friend

penco
10-17-2010, 12:36 AM
fsm, and get the rebuild dvd. It helped me out.

s14slideshow
10-17-2010, 08:29 AM
finally found an FSM that worked, Thanks

JonGu
10-17-2010, 02:11 PM
If the machine shop is asking you to to find this information for them, I would find another machine shop.

s14slideshow
10-17-2010, 02:31 PM
If the machine shop is asking you to to find this information for them, I would find another machine shop.


All the machine shops around here work on domestic stuff like 350's all day. Some actually turn down import work.

s14unimog
10-22-2010, 11:48 AM
that's because they can't find the information for THAT motor. There is nothing unique about the SR20... Get them the specs and they can do the necessary work surely...