JDS Performance
10-10-2010, 07:04 PM
FS; 240sx KA24DE S14 Head " Rebuilt to your specs"
It came off a 95' but will work on all KA24DE DOHC - In great shape came from a running motor - never overheated or blown head gasket - It will come with S14 cams (232) unless buyer wants different. Head will also come with top timing cover (resurfaced with head) w/ mounting bolts also the valve cover w/ mounting bolts.
What all I recommend but not limited to;
- Hot tanked & checked for cracks/warpage
- Resurfaced at least to remove old gasket and level to spec
- 3 angle valve job
- New valve oil seals
- Valve lash checked and set to spec
- All OEM Nissan parts used and replaced "if needed"
- Compression tested
Let me know what all you would like me to do to the head if it be OEM build or aftermarket parts etc. I will give you a quote.
The last head I sold that was OEM rebuilt - all specs below:
It came off a 96' but will work on all KA24DE DOHC
No timing cover or valve cover.
- Hot tanked & checked for cracks/warpage
- It has been resurfaced and within spec (.007")
- 3 angle valve job
- New valve oil seals
- S14 232 cams installed
- Valve lash has been checked and recorded but "new" shims have not been installed
- Broken stud removed and replaced
- All OEM Nissan parts used and replaced "if needed"
Price - $375.00 "Firm" ///Sold for $420.00 shipped/// - No core needed - But I will take one - PM/Email me for more info.
Concord, NC 28025
[email protected]
I dont have pix to post right now but you can check it out on this video for now;
YouTube - 240sx KA24DE Head Build DVD Sneak Peek Video Giveaway Contest Free 1080.mp4 (http://www.youtube.com/watch?v=178Q6TM-BlY)
It came off a 95' but will work on all KA24DE DOHC - In great shape came from a running motor - never overheated or blown head gasket - It will come with S14 cams (232) unless buyer wants different. Head will also come with top timing cover (resurfaced with head) w/ mounting bolts also the valve cover w/ mounting bolts.
What all I recommend but not limited to;
- Hot tanked & checked for cracks/warpage
- Resurfaced at least to remove old gasket and level to spec
- 3 angle valve job
- New valve oil seals
- Valve lash checked and set to spec
- All OEM Nissan parts used and replaced "if needed"
- Compression tested
Let me know what all you would like me to do to the head if it be OEM build or aftermarket parts etc. I will give you a quote.
The last head I sold that was OEM rebuilt - all specs below:
It came off a 96' but will work on all KA24DE DOHC
No timing cover or valve cover.
- Hot tanked & checked for cracks/warpage
- It has been resurfaced and within spec (.007")
- 3 angle valve job
- New valve oil seals
- S14 232 cams installed
- Valve lash has been checked and recorded but "new" shims have not been installed
- Broken stud removed and replaced
- All OEM Nissan parts used and replaced "if needed"
Price - $375.00 "Firm" ///Sold for $420.00 shipped/// - No core needed - But I will take one - PM/Email me for more info.
Concord, NC 28025
[email protected]
I dont have pix to post right now but you can check it out on this video for now;
YouTube - 240sx KA24DE Head Build DVD Sneak Peek Video Giveaway Contest Free 1080.mp4 (http://www.youtube.com/watch?v=178Q6TM-BlY)