PDA

View Full Version : SR20DET W/Apexi Power FC


swervin zx6r
10-09-2010, 02:45 AM
Hey everyone,

I am about to swap a SR out of a s14, and swap it into a s13. The SR already has the Power FC installed and tuned. I have a couple questions I would like to ask before I yank everything out.

1: Will disconnecting it from the battery do anything with my tune?

2: This is what you do for installation:
# Disconnect Power
# Unplug stock ECU
# Plug in PowerFC ECU
# Reconnect Power
# Start Car, let it idle for approx 10 minutes before doing anything
# Turn on aircon, let it readjust its idle and wait about 10 minutes
# Turn on demister, let it readjust its idle and wait about 10 minutes

But will I have to do this again?

Thanks for the help

jspaeth
10-09-2010, 08:51 AM
1) No

2) If you are just moving everything over from 1 chassis to the other, then you will be fine.

The idle thing sometimes needs to be redone when you make BIG changes to the setup, but you aren't doing that.


This should be just a drop in for you