PDA

View Full Version : z33 6spd trans to S13 sr motor

Big Zee
10-03-2010, 06:49 PM
has anyone done this conversion ? or know where a write up is do to this ?
I'm tired of breaking transmissions and replacing them and want something more beefy. the Z32 trans is a option but why not go for the extra gear for the amount of work involved :)
theboy
10-03-2010, 07:01 PM
if you want a 6 speed, why not just get an s15 trans, those are 6 speeds
japordie
10-03-2010, 07:07 PM
he's right get an s15 tranny
Okinawandrifter87
10-03-2010, 07:10 PM
Try google first but it has been done. In Import Tuner there was an issue where there was a Seafoam green OEM 2 Tone and it had an SR20det with a Z33 mated up to it, so it is possible. However I think it will be easier to mate the S15.
sr23det
10-03-2010, 07:12 PM
i think the op is tired of breaking transmissions, iirc the s15 trans is not any if that better than the sr 5 speeds.
Okinawandrifter87
10-03-2010, 07:17 PM
I saw your op but why not just go with the z32? There's nothing wrong with it, and it's way more than capable of holding all your power and torque.
Team DET
10-03-2010, 07:28 PM
Mazworx VQ35 tranny on an SR available now - FreshAlloy.com Forums (http://www.freshalloy.com/forums/showthread.php?t=168243) dont know if they still offer the kit
Big Zee
10-03-2010, 10:40 PM
Mazworx VQ35 tranny on an SR available now - FreshAlloy.com Forums (http://www.freshalloy.com/forums/showthread.php?t=168243) dont know if they still offer the kit

thanks dude! I'll look into that :)
japordie
10-04-2010, 12:35 PM
good idea, I'll look into it also.
240sx123$
10-04-2010, 12:51 PM
if you want a 6 speed, why not just get an s15 trans, those are 6 speeds

he's right get an s15 tranny

S15 trans is junk. Its considerably weaker than the 5 speed, and offers no real benefit aside from closer ratio gears. 6th gear in the 6 speed is the same as 5th in the 5 speed. Not to mention the speed sensor for the s15 is on the rear dif.
xiaphin
10-04-2010, 01:17 PM
Mazworx VQ35 tranny on an SR available now - FreshAlloy.com Forums (http://www.freshalloy.com/forums/showthread.php?t=168243) dont know if they still offer the kit

What ↑ said. Mazworx (http://www.mazworx.com) didnt see it on the site. Doesnt mean they still dont make it.