PDA

View Full Version : 95 KA24DE swap to 91 S13


Urbanfer
09-28-2010, 05:40 PM
Im pretty noob at this and my friends said to go to this forum for help. So here is my problem i recently swapped out my 91 KA for a 95 and now im having problems with the parts. For example the ecu is different and the harnesses, also i need a distributor. Right now i found a distributor but its a 95 Dual Cam will that work for my 95 motor? Is anyone selling a 95 ECU and HARNESS? Also what other problems will i run into while im swapping the motors? My mechanic alrdy has the motor in place just waiting on the parts i listed.

If possible can you guys help me step by step on whats going on etc (like whats next in swapping the engine) i did say im pretty noob at this haha

thanks!

DRIFTING_SIL_EIGHTY
09-28-2010, 05:57 PM
you need to swap over parts from your 91 ka.

-intake manifold
-exhaust manifold
-distributor
-engine harness

just an fyi. This has been covered numerous times so just search on here or on the internet in general and you will find your answers.

GroundPerformance
09-28-2010, 06:22 PM
^^ Like he said if you're S13 KA was complete you just need the actual longblock from the S14 KA and move all your S13 components and done. GL

japordie
10-03-2010, 12:06 PM
I agree. it should be that easy.

jacobs13
10-03-2010, 12:17 PM
I did this swap. I kept everything s14 and had jeff jordan wire it for me. I believe he merged the upper and lower harness and merged the fuel pump relar, ignition, and I think starter. Anyways good luck it was a headache for me i would recommend you get an s13 dizzy and plenum

lazysk8er2
10-03-2010, 01:05 PM
i would keep the 91 cams too